These forums are read only, please use our new forums here.

Main :: POD HD


Support forums for all POD HD products


V2.1 is available
by silverhead on 2012-10-16 12:34:03

From the Downloads page................................

POD HD500 Flash Memory v2.1 RELEASE NOTES

POD HD500 Flash Memory v2.1 is a FREE firmware update that is highly recommended for all POD HD500 users.

  What’s New? POD HD500 2.1 includes five new HD guitar amp models and integration support for L3t, L3m, and L3s speakers over L6 LINK.

  • “Solo 100 Clean”, “Solo 100 Crunch”, and “Solo 100 Overdrive” HD Guitar Amp Models Three new HD guitar amp models based on* the Clean/Crunch and Overdrive channels of the classic, hand-built Soldano® SLO100 Super Lead Overdrive 100-watt head.
  • “Line 6 Doom” and “Line 6 Epic” HD Guitar Amp Models Two new, Line 6 original HD guitar amp models with lots of gain on tap. Line 6 Doom delivers maximum sludge by combining a Marshall® JCM800 preamp and Hiwatt® Custom 100 power amp with some additional tweaks. Line 6 Epic provides sustain for days at virtually any playing dynamic, giving up gobs of distortion with ease.  Play with the Master Volume parameter to experience the true versatility of these amps.
  • StageSource Speaker Support The update also enables POD HD Pro and POD HD500 to integrate with StageSource loudspeakers in revolutionary new ways. You can instantly recall StageSource Smart Speaker modes via POD HD presets, making StageSource and POD HD Pro or HD500 the ultimate integrated FRFR (Full Range Flat Response) guitar system. You can switch from a full-range acoustic sound for the verse to a dialed-in 2 x 12” guitar cabinet for the chorus—with just the press of a footswitch. You can also change to Keyboard mode for dramatic guitar synth soundscapes. Add multiple StageSource speakers via L6 LINK for stereo effects configuration, wet/dry/wet setups, and more.

FAQ For more information about POD HD500, the POD HD500 FAQ can be found here.

The Advanced Users Guide The latest version of the Advanced User's Guide for the POD HD500 can be found here.

  *All product names used in this webpage are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model development.


     OS: Windows XP, Mac OS X, Windows Vista, Windows 7



Re: V2.1 is available
by hurghanico on 2012-10-16 12:40:41

great news!



Re: V2.1 is available
by jimsreynolds on 2012-10-16 12:59:43

See, I told everyone that it would be 'soon'



Re: V2.1 is available
by Astaroth_CY on 2012-10-16 13:03:12

Good, at least it'll be less crazy around here until the HD300/400s get the next FW update... Can't wait to try out the new amps.

I won't be installing this until next week since I have a major gig on Saturday and don't want any surprises. Let's hope people start installing it and reporting on any bugs or unannounced changes quickly.



Re: V2.1 is available
by mcolquitt on 2012-10-16 13:33:01

my first SLO lead tone

http://line6.com/customtone/tone/221195/



Re: V2.1 is available
by jimsreynolds on 2012-10-16 13:41:45

Astaroth_CY wrote:

I won't be installing this until next week since I have a major gig on Saturday and don't want any surprises.

Smart move.  Watch and learn people .....  the last thing you want before a committment is a major upgrade.   Save it for a quiet moment or face the consequences stoicly.



Re: V2.1 is available
by Warfare on 2012-10-16 14:38:23

Thank you Line 6 !

Here's my feedback about looper mode and Pod HD Desktop with FBV Express :

Good point : It's now basically functionning.

Bad point : BUT it's impossible to swith beetween Dub In and Dub Out ... while it's possible with Pod buttons. Too bad.

Hope to spend more time with SLO 100 before posting any feedback



Re: V2.1 is available
by meambobbo on 2012-10-16 14:43:29

When are we getting the update for the Peavey 5150, Peavey JSX, Diezel Herbert, Diezel VH4, Mesa Mark I, Mesa Mark IIC+, Mesa Mark IV, Mesa Royal Atlantic, Roland JC-120, Orange AD30, Marshall JMP, Marshall Silver Jubilee, Marshall AFD, Carvin Legacy, Komet 60, Blackstar S1, Krank Revolution, and Dumble amp models?



Re: V2.1 is available
by silverhead on 2012-10-16 14:47:13

'Soon'. But not until the 300/400 owners have had them for a few months.



Re: V2.1 is available
by hurghanico on 2012-10-16 15:06:17

is right!
first the children and then the adults



Re: V2.1 is available
by meambobbo on 2012-10-16 15:18:08

as long as we never give them the Cab DEP's, that's cool. 



Re: V2.1 is available
by DeanDinosaur on 2012-10-16 15:31:26

The update announcement is missing a statement of how gracefully and patiently the HD 500 owners awaited the update.  From here on, line 6 will update everyone at the same time I think.



Re: V2.1 is available
by Karl_Houseknecht on 2012-10-16 15:39:11

DeanDinosaur wrote:

The update announcement is missing a statement of how gracefully and patiently the HD 500 owners awaited the update.

Said with tongue firmly in cheek...



Re: V2.1 is available
by stevem48048 on 2012-10-16 15:50:16

Thank you so much LINE 6. The amp models sound PHENOMINAL ... We knew we could count on you . hehehehehe

NOTE: The update is only addressing the 500 users and not the Bean + Pro Users



Re: V2.1 is available
by silverhead on 2012-10-16 16:01:46

The Bean/Pro updates are also available, as far as I can tell. I see them too in the Downloads section.



Re: V2.1 is available
by hurghanico on 2012-10-16 16:26:38

It's a real pleasure to play with the 3 new Soldano models!

Line 6 Doom and Epic are also 2 very nice additions to the amps arsenal,

especially the Doom for my jazz-bluesy-rock taste

Thanks Line 6



Re: V2.1 is available
by silverhead on 2012-10-16 16:38:03

DeanDinosaur wrote:

..... From here on, line 6 will update everyone at the same time I think.

You're probably right. Maybe that's why this HD500 release doesn't include any additional amp models - perhaps because of the HD500 user outcry here they're waiting until they have the next HD300/400 release ready so that everybody will get them at the same time.

The sword cuts both ways.



Re: V2.1 is available
by chimp_spanner on 2012-10-16 17:11:00

Yes! Really glad to hear this. Downloading now. Can't wait



Re: V2.1 is available
by scottyo78 on 2012-10-16 17:11:04

I checked the "The Advanced Users Guide" link at the first post per Silverhead but all I find on the Line 6 site is the "Old" one for version 2.0.

Am I missing something?



Re: V2.1 is available
by toneman2121 on 2012-10-16 17:19:02

THE UPDATES OUT!?!?



Re: V2.1 is available
by silverhead on 2012-10-16 17:34:00

I don't think the updated manuals are posted yet - I see what you are seeing.



Re: V2.1 is available
by CairnsFella on 2012-10-16 17:36:23

Happy for you all (honestly I am).

Though I didnt expect otherwise, I am still a little sad that there was no additional bass amp included.

Also seems a little odd that none of the issues that you guys have been raising were adressed (Aside the amp models which were frankly requisite given the 300/400 update). I really thought, given the delay from the 300/400 update, that they were working on at least one little suprise. Again, of little consequence to a guy of my lesser abilities (aside from the warm glow one gets from having more toys to play with ).



Re: V2.1 is available
by silverhead on 2012-10-16 17:52:53

CairnsFella wrote:

..... I really thought, given the delay from the 300/400 update, that they were working on at least one little suprise. ....

The StageSource compatability was a bit of a pleasant surprise, although it applies only to those who own the speakers (similar to the JTV compatability that does not apply to every HD500 owner).

As for other surprises like new amp models - it's already been suggested that the HD500 users might have gotten what they asked for - simultaneous amp/feature releases for all products. Hence, any new amp models that might otherwise have been included in this release are being held back until the next HD300/400 release is available so that everyone gets them at the same time. I have no idea whether that is the case, but it is the implication of what the uproar was all about.



Re: V2.1 is available
by chimp_spanner on 2012-10-16 18:07:02

I think I could quite happily base all my tones off those three soldano channels. Jeez. They're lovely! Crunch with tube screamer is my kind of rhythm tone. Nice and percussive. I'm a happy chimp!



Re: V2.1 is available
by stevem48048 on 2012-10-16 18:25:29

Thanx for keying in SILVERHEAD, Indeed it is on there, And yes i hold my tail between my legs about my b**chin about the update. But boy was it worth the wait. I love all of the new amps...

Although i didn't gripe as much as some



Re: V2.1 is available
by ianblackburn on 2012-10-16 18:32:12

Been wanting a SLO for my 500 for a year and a half. Am happy now, just great! Will be using the SLO tones loads from now on.



Re: V2.1 is available
by meambobbo on 2012-10-16 18:54:03

we had the same issue last time - it's not just Line 6's site that needs to be updated.  some people saw the newer versions while some saw the older versions, seemingly at random.  I'm suspecting akamai's cached versions of these pages throughout the internet take a little time to all get updated or something.



Re: V2.1 is available
by meambobbo on 2012-10-16 18:55:29

Anyone notice the SLOverdrive (U C WAT I DID THAR?) model takes up much more DSP than other models?



Re: V2.1 is available
by CairnsFella on 2012-10-16 19:08:42

silverhead wrote:

As for other surprises like new amp models - it's already been suggested that the HD500 users might have gotten what they asked for - simultaneous amp/feature releases for all products. Hence, any new amp models that might otherwise have been included in this release are being held back until the next HD300/400 release is available so that everyone gets them at the same time.

I will certainly be maintaining some hope (and I would agree that this approach would make more sense).

That said, there has also been some chatter that not all are expecting any further releases. Speculative I guess. But given the amount of issues / feature requests, and the current age of the HD platform, I would not be surprised if all efforts were not directed toward a new platform. This is mainly why I am a little disappointed. Not that I believe I should have more, but because I would not be suprised if that was the last we get.



Re: V2.1 is available
by BMoe on 2012-10-16 19:32:02

Maybe, but they sound very very good!! Maybe it's my mood but all of the new amps

are great.

Thanks, Line 6, all the amps sound superb, and I am not kissing any arse here.

Don't want to be labeled as a "Fan Boy"



Re: V2.1 is available
by meambobbo on 2012-10-16 19:39:55

ok, so the SLOverdrive is the best model on here.  The warm response it has is incredible.  SO WARM.  Maybe not the tightest 5150-esque metal tone (at least from my early attempts at one), but it dominates for leads and all hard rock tones.  VERY responsive to dynamics - a model that truly cleans up when turning down the volume knob.  I easily see this working for Petrucci and Vai tones - just dial in the Vai with a Distortion effect in front for a fatter, rounder breakup tone, and make the Petrucci tone tighter and djentier.

I've also found that while I can't fit delay and reverb when using "dual cab" patches due to the higher DSP constraints, I can get a great sound by using a delay as well as using some E.R. to simulate reverb.  Not as much control as a real reverb, and I usually don't like it, but it works here.  will post clips/patches later.  will make my own thread.



Re: V2.1 is available
by DeanDinosaur on 2012-10-16 20:02:10

With the new high gain amps, I can say that's it's no longer an issue getting an excellent high gain tone with minimal effort. I don't know if it's just my imagination, but my HD500 is sounding even better. Previous patches in previous updates had to be adjusted, this time my previous patches sound even better! I spent most of the last three hours playing the Epic. It really is epic!!



Re: V2.1 is available
by meambobbo on 2012-10-16 20:33:26

http://soundcloud.com/meambobbo/vai-slo

">http://soundcloud.com/meambobbo/vai-slo">http://soundcloud.com/meambobbo/vai-slo



Re: V2.1 is available
by AzolHD on 2012-10-16 22:35:58

So does it mean that there are no bugfixes included in this update? Won't be able to test it for some time yet, can anyone confirm if it fixes looper issue with PD HD and FBV Express II?



Re: V2.1 is available
by jerryratpack on 2012-10-17 02:48:29

i spent a lot of time on the epic as well. very easy to get nice smooth solo sound out of this with just the amp , screamer, and delay, and i was going thru headphones. i look forward to trying the Epic amp thru my monitors.



Re: V2.1 is available
by Octo777 on 2012-10-17 02:57:59

The Slo Model is outstanding. It's just dripping with harmonic overtones. I absolutely love it.

Some tweaking and I think the Lead Channel is easily gonna replace the Engl in my set ups.



Re: V2.1 is available
by alfmetal70 on 2012-10-17 04:11:18

s$%&/ I am starting the day in the work, I will know the HD SLO model´s in 8 hours more...



Re: V2.1 is available
by fenders74 on 2012-10-17 04:31:58

No acoutic Amps.....no true separate XLR out....no edit sw improovment.



Re: V2.1 is available
by TheRealZap on 2012-10-17 05:28:16

there's always bug fixes... read in another thread that the express works now with the looper...  i didn't personally check and the poster said it wasn't perfect but finally usable.



Re: V2.1 is available
by Astaroth_CY on 2012-10-17 05:49:43

Maybe given how good it sounds, you won't have to dual-cab this one, hence will have more DSP available?



Re: V2.1 is available
by mlong on 2012-10-17 06:02:40

Do they usually post what the bug fixes are? I've been struggling with an issue with the external expressions pedal that Mission Engineering claims is an HD500 issue and would like to know if that was addressed before I update. 



Re: V2.1 is available
by phil_m on 2012-10-17 06:32:28

What's the issue you're having? I haven't seen any complaints regarding a bug for the external expression pedal.



Re: V2.1 is available
by michaedr on 2012-10-17 06:35:31

I have the Mission EP1-L6 and don't have any issues with using it as an external pedal.  Out of curiosity what is your issue?



Re: V2.1 is available
by TheRealZap on 2012-10-17 06:45:47

mission did have a hardware fix that addressed some things with their expression pedals and line6 devices... may ask them if you have the pedal with the fix, or need the update.

they generally don't release detailed notes about what was fixed unless it's a huge impact fix... meaning lots of affected users...

you might call and ask... but, be prepared for customer service to get back with you, since they would have to followup with other sources.... they pretty much get the same notes as we do, they just know who to ask for more detail.



Re: V2.1 is available
by Mincer on 2012-10-17 06:56:53

I did read that they fixed how the overdub parameter in the manual is described, but I can't find that the exp pedal works with the looper. If you have a source for this let me know.



Re: V2.1 is available
by phil_m on 2012-10-17 07:01:15

There never been expression pedal control available with the looper. I don't have any reason to believe that this has been changed.



Re: V2.1 is available
by Mincer on 2012-10-17 07:09:13

Right, but there should have been, since the DL4 and M series had it... L6 Expert User TheRealZap stated earlier in the thread that he read that this oversight might have been fixed.



Re: V2.1 is available
by sidysm on 2012-10-17 07:15:03

He didn't mean expression he was refering to the the fbv express when used with the bean or hd pro. Expression control of volume is still sadly missing



Re: V2.1 is available
by phil_m on 2012-10-17 07:15:09

Oh, I think Zap was talking about the FBV Express MKii Foot Controller now being able to control the looper functions.



Re: V2.1 is available
by Mincer on 2012-10-17 07:21:31

Oops. Well, there is always 2.2, right?



Re: V2.1 is available
by mlong on 2012-10-17 07:21:53

The issue is that whatever parameter it controls goes to 100% well before toe down position. Mission supposedly modified the design a year or so ago and offered kits(parallel resistor) to drop the total resistance to between 6K & 7k ohms. The current pedals are using a linear 10k pot. Mission's current response is that its an HD400 & 500 issue that Line 6 needs to fix and the current EP1-L6 model works fine with all other Line 6 products. They are not going to put out a specific model or mod just for the HD400/500.

That sucks when its a $130 pedal with just a pot in it. I have to agree that if it works fine with all other L6 products, Line 6 needs to fix it or put a calibration routine for the external pedal.

If yours works, it would be nice to know what resistance reading you get at toe down.



Re: V2.1 is available
by mlong on 2012-10-17 07:25:11

Been there done that. I just posted above that Mission's support stance is currently that my pedal(manufactured just about a month or so ago) is working to spec and it's a Line 6 issue.

I'm trying to decide now if I mod a brand new $130 foot pedal with just a pot in it or give up and send it back to Sweetwater.    

Meant to put this link to earlier forum post in my earlier post.

http://line6.com/support/message/220071#220071

">http://line6.com/support/message/220071#220071">http://line6.com/support/message/220071#220071



Re: V2.1 is available
by phil_m on 2012-10-17 07:33:11

I've not used the Mission Engineering pedal. I have used it with my Line 6 EX-1, and it works fine for me. Did you buy your pedal before or after Mission altered its design? Or are you saying they actually didn't alter their design? It was my understanding that they revised the design of the EP1-L6 after the HD500 came out. Perhaps I'm mistaken in thinking that, though.



Re: V2.1 is available
by meambobbo on 2012-10-17 11:13:08

i've always been more of a pure tone than effects guy, and I can still get what I want done with dual cabs.  I've been using E.R. to simulate reverb and can still fit Delay, so that's all I really need.  I've already dialed in enough crazy patches, and I'm not going back and redoing them for the SLO.

I don't think the excellent tone of the SLO can overcome the issues I have with the single cabs.  There's only a handful of combinations that cut if for me:

1) PhD 2x12 - boost Res. Level, 57 on axis

2) Hiway 4x12, 57 on/off axis

3) XXL 4x12, 409 Dyn



Re: V2.1 is available
by stevem48048 on 2012-10-17 14:13:20

Patch sounds Awesome as usual meambobbo ... Nice job bud ...



Re: V2.1 is available
by Netfly on 2012-10-17 15:30:18

SLO 100 Head, finally!! Thx a lot Line6 for this amazing update. Amps sound great really. I spent the day playing with Soldano Crunch and Overdrive, my fingers are burning



Re: V2.1 is available
by spikey on 2012-10-17 16:59:52

Thanks - wondered where the updates for 2.10 were listed...



Re: V2.1 is available
by spikey on 2012-10-17 17:03:03

fenders74 wrote:

No acoutic Amps.....no true separate XLR out....no edit sw improovment.

Yea I would haved killed for seperate  XLR/ quarter inch jack output settings, but what we got is very nice. We can hope for later on....



Re: V2.1 is available
by alfmetal70 on 2012-10-17 19:09:33

I was playing for 3 hours, and I can say that for my ears:

-Doom: is just good, I don´t like much, make me remember the sound from the POD XT, sound very simulation and not "real".

-Epic: very good, same quality than the SLO, maybe more metal but in the same line of tone.

-SLO clean: is not for me, have much body the sound, is good but not my style.

-SLO Crunch: Fu$%&/ good, so sad for me that I don´t use crunch sound, but is incredible, very natural, vey real

-SLO Overdrive: My sound, easy to find the rigth eq, much dinamic, much clarity and open sound, all the bite/kick/punch/etc...

Well, just now the POD HD is going to other level, the SLO gave a new place in the competition with the others brands, without doubt now is fighting with the AXE and "hand to hand" when you use the SLO. Grettings and thank for the update



Re: V2.1 is available
by toneman2121 on 2012-10-17 19:34:15

alfmetal70 wrote:

I was playing for 3 hours, and I can say that for my ears:

-Doom: is just good, I don´t like much, make me remember the sound from the POD XT, sound very simulation and not "real".

-

you know. man, i bet somewhere down the road, you'll find a good tone for you in doom



Re: V2.1 is available
by AzolHD on 2012-10-18 00:49:04

I checked the update today and could not find any problems with dub-in and dub-out modes. Can you re-check it again? Maybe I am missing something...



Re: V2.1 is available
by alfmetal70 on 2012-10-18 04:37:10

well everyone will find something special to every model, all will depend to the ears and the context for evaluate the model.

Is not bad the Doom model but with the SLO Crunch and Overdrive sounding so real maybe is difficult for me do other evaluation in this moment. Also es important say that I prove the "update" with my amp, so is more in "live" context, I don´t know the behavior going direct to the mixer or the computer. Also is good say that for my ears every models sounded much better with the "tube screamer sim" in front.

This nigth I will continue the evaluating and I will try to do some video the weekend for show the sound with the amp (if somebody is interesting in that).

Greetings



Re: V2.1 is available
by d0stenning on 2012-10-18 06:58:39

I am disappointed on several levels.

I was really hoping Line6 would add some more features for those of us who use the Acoustic and Archtop models a lot.

I have ins the past raised a feature request for example to allow us to set the "amp" block to be one of the EQ effects so those of us who need a TONE CONTROL but dont want to use the coloration of an

amp,  or amplifier speaker cabinet can do so.  This would have - for example - allowed us to use the big knobs to adjust the tone/eq  of an acoustic model = say a martin, quickly and easily in a live situation.

But no....  yet more amps  with emphasis on distortion.

It would have been far more impressive to have added a Polytone or  Peterson acoustic amp model - for those who at times need that type of amp.

Not everyone wants valves at all times!

Theres not even a Jazz Chorus in there -   even though i'd much rathert have some polytones, peterson, Fishman or AER

For those of us who are going directly into a PA  these things are imporant...

In any case -  operatiig the EQ settings is often quite fiddly.



Re: V2.1 is available
by joel_brown on 2012-10-18 13:18:24

Wow the Soldano is unbelivable.  After months of tweaking and buying an external Dual 31 Band EQ to help with the tweaking, I can throw away everything I did.  I pull up the Soldano adjust the Res Level and Drive a little and I'm done.  Blows away everything I've done to this point.

Line6 out did themselves on this.  Thank you...



Re: V2.1 is available
by lef38 on 2012-10-18 14:51:07

Strange: all the new amps are set to topology I , while high gain amps should be on topology III or IV for example.

Is this a miss by Line 6 ?

I'm not sure it will sound nice in my DT25 if  I don't adjust this. Will try tomorrow.



Re: V2.1 is available
by toneman2121 on 2012-10-18 15:14:45

alfmetal70 wrote:

well everyone will find something special to every model, all will depend to the ears and the context for evaluate the model.

Is not bad the Doom model but with the SLO Crunch and Overdrive sounding so real maybe is difficult for me do other evaluation in this moment. Also es important say that I prove the "update" with my amp, so is more in "live" context, I don´t know the behavior going direct to the mixer or the computer. Also is good say that for my ears every models sounded much better with the "tube screamer sim" in front.

This nigth I will continue the evaluating and I will try to do some video the weekend for show the sound with the amp (if somebody is interesting in that).

Greetings

i;m gonna hold you to that video



Re: V2.1 is available
by Warfare on 2012-10-18 15:16:19

My bad, I forgot to set the FBV Express within configuration menu.

Now all is working perfectly !



Re: V2.1 is available
by shredborland on 2012-10-18 15:18:16

I updated my bean to 2.1 via Monkey but still unable to find the new tones.help?



Re: V2.1 is available
by shredborland on 2012-10-18 15:18:55

I updated my bean to 2.1 via Monkey but still unable to find the new tones.help?



Re: V2.1 is available
by toneman2121 on 2012-10-18 15:20:42

the only thing i can suggest is to remove all line6 stuff with line6 uninstall tool and start over with monkey



Re: V2.1 is available
by shredborland on 2012-10-18 15:32:11

tried the same.updated again to 2.1,open HD edit and then it says do you want new presets to be saved,it shows receving new presets but doesnt update to new models?wonder am i the only one with this problem?



Re: V2.1 is available
by DeanDinosaur on 2012-10-18 15:51:25

shredborland wrote:

tried the same.updated again to 2.1,open HD edit and then it says do you want new presets to be saved,it shows receving new presets but doesnt update to new models?wonder am i the only one with this problem?

did you also update the line 6 edit? If you're still using the older line 6 edit version it won't work with the new firmware.



Re: V2.1 is available
by phil_m on 2012-10-18 15:52:30

What new tones are you referring to exactly? I don't believe there are any new presets as part of this update, just new amp models.



Re: V2.1 is available
by scottyo78 on 2012-10-18 16:21:16

I agree...

Although I haven't scrolled through every preset since I updated to 2.1, the ones that I have looked through are the same.

But I was hoping there would be some new ones made with the new Amp Models.

P.S. and FYI there is indeed a new Monkey at version 1.61. My previous version was 1.59.



Re: V2.1 is available
by shredborland on 2012-10-18 23:52:30

yes,new amp models Like the one based on Soldano amp.I have everything updated to the latest including monkey 1.61 and the HD edit 2.21. Still cant find the new HD amp models.*sigh*



Re: V2.1 is available
by AzolHD on 2012-10-19 00:21:21

I did the complete reset while upgrading (POD HD Desktop) - holding the Left button while powering on etc - and after upgrade I checked the 1st bank (titled Best of HD or something like that) and I noticed several new presets I never saw before. But I almost never use anything from these factory preset banks except for some acoustic tones to build upon, might as well be my imagination? Can someone else confirm it?

I can post the names of the presets in question when I get home.



Re: V2.1 is available
by sidysm on 2012-10-19 01:02:11

There's no new presets for these amps. You need to go to the amps page and select them from the drop down. If you have newest hd edit they'd be there even if there was a probl;em with your pod. If you want presets for them check custom tone, theres already been a few posted.




The information above may not be current, and you should direct questions to the current forum or review the manual.