These forums are read only, please use our new forums here.

Main :: Spider Jam

Screech at start of loop
by lazysilverback on 2012-01-04 18:20:52.2400

I have a new Spiderjam unit with a weird problem... if I pick a drum beat and lay down a track on top of it, all is good.  If I then lay down a second track on that loop, when played back there is a momentary weird screech at the beginning of the loop; after that the loop sounds fine.

I thought maybe a firmware upgrade, but I checked and the firmware is current (DSP 2.09 / MCU 1.05)

Re: Screech at start of loop
by Line6david on 2012-01-11 17:11:06.2070


Have you tried a reset on the Spider Jam? Hold down the settings/tone button as you turn on the power and hold the button for 5-8 seconds.



Line 6 Customer Support

Re: Screech at start of loop
by lazysilverback on 2012-01-12 18:00:52.4480

I wound up flashing the firmware, which seemed to do the trick.

The information above may not be current, and you should direct questions to the current forum or review the manual.