1996
AxSys 212

AxSys 212

The AxSys 212 was the first modeling guitar amp that used software-based models to recreate the tone of analog tubes, providing unprecedented access to the sound and feel of various classic guitar amps & multiple classic guitar effects from a single 2x12" speaker combo amp.
1997
Floorboard

Floorboard

A foot controller for the AxSys 212, Flextone, and Spider amp families which provided Wah and Volume pedals, and stomp-style footswitches for tuner, effects on/off and preset selection.
Flextone

Flextone

The Flextone family amps were an evolution of the AxSys 212 concept. The amps in the Flextone had guitarist-friendly controls for dialing in amp tones and effects settings. The Flextone was a 60-watt, 1x12 mono combo amp.
1998
Flextone Duo

Flextone Duo

The Flextone Duo was the 100-watt, 2x10 stereo combo from the original Flextone family.
Flextone Plus

Flextone Plus

The Flextone Plus was a 60-watt, 1x12 combo amp with an extra power amp for powering an optional Flextone Cab - with the cab connected the amp converted to stereo operation at 50-watts per side.
Flextone Cab

Flextone Cab

The Flextone Cab was a 1x12 extension speaker cabinet designed to provide stereo operation when used with a Flextone Plus amplifier.
FB4

FB4

A 4-button foot controller that provided essential channel switching for early Line 6 gear.
AX2

AX2

Offered as both an upgrade kit for the AxSys 212 amplifier as well as a new amplifier product, the AX2 added several enhancements, including additional amp, speaker & effects models, improved control responsiveness and a new set of factory presets.
Amp Farm TDM

Amp Farm TDM

Amp Farm brought Line 6 modeling technology into a software plug-in format, allowing owners of Digidesign® Pro Tools® TDM digital audio workstations to reap the benefits of virtual amplifier & speaker sounds completely within their computer. Amp Farm has been used on countless platinum recordings since its inception.
Flextone HD

Flextone HD

The Flextone HD was a higher power amp head addition to the Flextone amplifier family, boasting a monstrous 300-watt stereo power section.
Line 6 212S Cab

Line 6 212S Cab

A 2x12 extension speaker cabinet that offered mono or stereo output for Flextone amplifiers.
Flextone XL

Flextone XL

The Flextone XL was a 100-watt, 2x12 combo amplifier with a foot controller for additional amp & effects switching capabilities.
POD

POD

The original POD was a revolutionary, kidney bean-shaped "desktop" modeling device for guitarists, offering a set of 16 amplifier models, 16 effects, and a selection of speaker cabs. It provided outputs for connecting directly to recording equipment, an external amplifier or PA system, or to headphones for late night practicing.
1999
Spider 112

Spider 112

The Spider 112 was a 50-watt, 1x12 combo amplifier featuring 6 amp and 7 effects models, factory & programmable presets, and foot control capability via the Line 6 Floorboard, all at an affordable price.
Spider 210

Spider 210

The Spider 210 was a 50-watt (25-watts per channel) stereo, 2x10 combo addition to the Spider amp family.
DL4

DL4

A member of the "Stompbox Modeler" family of effects pedals, the DL4 Delay Modeler was a stereo effects pedal that featured 16 models of legendary echo & delay boxes, preset programmability, tap tempo, expression pedal control and even a loop sampler.
EX1

EX1

The EX1 was an optional expression pedal controller designed to work with numerous Line 6 products.
MM4

MM4

A member of the "Stompbox Modeler" family of effects pedals, the MM4 Modulation Modeler featured user-programmable presets, external pedal control, 16 models of coveted modulation-based guitar effects pedals such as phase shifters, flangers, chorus, vibrato, ring modulator and more.
Line 6 412T Cab

Line 6 412T Cab

In the tradition of British "stack" amp designs, the 412T was the 4x12 speaker cab for use with Line 6 amplifiers. The 412T featured a slanted front, designed to be used as a single cab, or mounted on top of a Line 6 412B for a full stack.
Line 6 412B Cab

Line 6 412B Cab

Like the 412T, the 412B was a 4x12 cabinet for Line 6 amps that included Celestion® Vintage 30 speakers, designed to be used a single cab, or as a "base" cab for which to stack a 412T cab.
PX-1

PX-1

The PX-1 was an AC power supply cable adapter for several Line 6 products, including the DL4, EX1, MM4 Stompbox Modeler pedals.
2000
Flextone II

Flextone II

The Flextone II 60-watt, 1x12 mono combo amp was the 2nd-generation Flextone, which added additional and improved amp models, editing capabilities and power amp, XLR and external speaker outs.
POD 2.0

POD 2.0

The POD 2.0 desktop modeler improved upon the classic POD by upping the count of amp models to 32, added interchangeable cab models, "ToneTransfer" (preset compatibility with POD Pro and Flextone II amps), faster preset switching, an improved tuner and the SoundDiver preset editing computer software app.
POD Pro

POD Pro

The POD Pro was born from adapting the POD 2.0 concept to a studio-friendly, rack mount chassis, including all the POD 2.0 features as well as added 24-Bit AES/EBU and S/PDIF digital and Dual-Mode XLR direct outputs.
POD 2.0 Upgrade

POD 2.0 Upgrade

Line 6 offered the POD 2.0 Upgrade for owners of the original POD device, which consisted of a pre-programmed E-Prom chip and do-it-yourself instructions for the simple task of backing up your presets and changing out the chip to transform their POD to a POD 2.0.
Bass POD

Bass POD

The Bass POD harnessed the core of a POD 2.0 and transformed it onto a POD designed for bassists. It featured 16 bass amp models, 16 bass cab & 16 effects, as well as all the functionality of POD 2.0, packaged in a gray colored version of the now-famous kidney bean shaped chassis.
Bass POD Pro

Bass POD Pro

The Bass POD Pro was the Bass POD device housed within a studio-friendly, rack mount chassis, including all the Bass POD features as well as added 24-Bit AES/EBU and S/PDIF digital and Dual-Mode XLR direct outputs.
Spider 212

Spider 212

The Spider 212 was a 100-watt (50-watts per channel) stereo, 2x12 combo addition to the Spider amp family.
DM4

DM4

A member of the "Stompbox Modeler" family of effects pedals, the DM4 Distortion Modeler featured user-programmable presets, external pedal control, 16 models of classic distortions, overdrives, fuzzes, boosts and more.
Flextone II Plus

Flextone II Plus

The Flextone II Plus was a 60-watt, 1x12 combo amp with unique Dual Mode direct outputs, and included an extra power amp for powering an optional Flextone Cab - with the cab connected the amp converted to stereo operation at 50-watts per side.
Flextone II XL

Flextone II XL

The Flextone XL was a 100-watt 2x12 combo amplifier in the Flextone II family. It also included the unique Dual Mode direct outputs as well as speaker outputs for connecting external speaker cabinets.
2001
Flextone II HD

Flextone II HD

The Flextone HD was a high power amp head version of the Flextone II amplifier, boasting 100-watts per channel stereo operation, Dual Mode direct outs, and a switchable series/parallel FX loop.
FM4

FM4

A member of the "Stompbox Modeler" family of effects pedals, the FM4 Filter Modeler featured user-programmable presets, external pedal control, 16 models of other-worldly effects such as oscillating filters, envelope followers, synth strings and more.
POD 2.0 Chrome

POD 2.0 Chrome

In 2001 Line 6 produced a limited edition run of POD 2.0 units in a special chrome finish instead of the standard red.
Echo Pro

Echo Pro

The Echo Pro was a studio-friendly, rack mount effects unit, offering models of coveted analog & tape echo and delay units. It included stereo in/out, 24-bit processing, user programmable presets, MIDI connectivity & clock sync, tap tempo and more.
FBV

FBV

The FBV was the road-ready foot controller designed to work with the Line 6 Vetta, Spider II, POD 2.0 and other products of the day. It offered steel channel & bypass footswitches, 2 expression pedals, a backlit display and more.
Vetta Cab

Vetta Cab

The Vetta Cab was an open-back, 2x12 extension speaker cabinet designed for use with Vetta amplifiers. It featured custom Celestion® speakers and mono/stereo connectivity.
Mod Pro

Mod Pro

The Mod Pro was a studio-friendly, rack mount effects unit, offering models of highly sought after phase shifter, flanger, chorus and other modulation-based effects units. It included stereo in/out, 24-bit processing, user programmable presets, MIDI connectivity & clock sync, tap tempo and more.
Filter Pro

Filter Pro

The Filter Pro was a studio-friendly, rack mount effects unit, offering models of other-worldly filter & synth effects. It included stereo in/out, 24-bit processing, user programmable presets, MIDI connectivity & clock sync, tap tempo and more.
Vetta Combo

Vetta Combo

The Vetta amplifier was designed as the Line 6 flagship, no-compromise guitar system that leveraged an entirety new generation of Line 6 modeling. It was a 100-watt stereo, 2x12 combo featuring numerous amp, cab & FX models, channel switching, Line 6 FBV controller support, stereo FX loop, user programmable presets, XLR direct outputs and more.
2002
Vetta HD

Vetta HD

The Vetta HD was the 200-watt (100-watts per channel) stereo head version of the flagship Vetta guitar amplifier.
GuitarPort

GuitarPort

GuitarPort brought the sonic power of the Line 6 POD to the computer, featuring a USB audio interface, software editor-librarian application and access to the GuitarPort Online website for a huge tone library and optional subscription-based lessons with classic songs of numerous styles.
AM4

AM4

A member of the "Stompbox Modeler" family of effects pedals, the AM4 Amplifier Modeler featured user-programmable presets, external pedal control, 16 models of classic & legendary amplifiers.
Duoverb Combo

Duoverb Combo

The Duoverb family of amplifiers offered a total of 16 classic amp models, simultaneous dual amp capability, stereo operation, FX loop, user programmable presets, FBV foot controller support, and more. The Duoverb Combo featured 2x12 Celestion® speakers and a 100-watt stereo power amp.
Duoverb HD

Duoverb HD

The Duoverb HD was a head version of the Duoverb amplifier family.
FBV Short Board

FBV Short Board

The FBV Short Board was a smaller sized version of the Line 6 FBV foot controller. It offered a backlit display, a smaller set of footswitches and one expression pedal.
PODxt

PODxt

PODxt was a significant new generation of POD, incorporating improved amp, cab & effects models (leveraged from Vetta and the Pro effects units) and enhanced audio performance. USB connectivity was also added, allowing for its use as a computer audio interface as well as for upcoming Line 6 software.
Variax 500

Variax 500

The Variax electric guitars featured built-in models emulating 25 classic electric & acoustic guitars, and other instruments. The mid-priced Variax 500 consisted of a basswood body, bolt-on maple neck, rosewood fingerboard and a special digital output to connect to supported Line 6 gear. This Variax 500 was the solid-body electric in a Gloss Black finish.
Variax 500 Black

Variax 500 Black

The Variax electric guitars featured built-in models emulating 25 classic electric & acoustic guitars, and other instruments. The mid-priced Variax 500 consisted of a basswood body, bolt-on maple neck, rosewood fingerboard and a special digital output to connect to supported Line 6 gear. This Variax 500 was the solid-body electric in a Gloss Black finish.
Variax 500 Red

Variax 500 Red

The Variax electric guitars featured built-in models emulating 25 classic electric & acoustic guitars, and other instruments. The mid-priced Variax 500 consisted of a basswood body, bolt-on maple neck, rosewood fingerboard and a special digital output to connect to supported Line 6 gear. This Variax 500 was the solid-body electric in a Candy Apple Red finish.
2003
Flextone III

Flextone III

The Flextone III family of amplifiers incorporated 32 Amp, 16 mix & match Cab & 12 effects models from the Vetta & PODxt generation products, FX loop, and MIDI support. The Flextone III was a mono, 75-watt, 1x12 combo amplifier.
Flextone III Plus

Flextone III Plus

The Flextone III was a mono, 75-watt, 1x12 combo amplifier, and included an extra power amp for powering an optional Flextone III Cab - with the cab connected the amp converted to stereo operation at 50-watts per side.
Flextone III XL

Flextone III XL

The Flextone III XL was a 150-watt, 2x12 combo amplifier with a foot controller for additional amp & effects switching capabilities. It also included the unique Dual Mode direct outputs as well as speaker outputs for connecting external speaker cabinets.
PODxt Pro

PODxt Pro

The PODxt Pro was a rack mount chassis device, including all the PODxt features as well as Variax input, 24-Bit AES/EBU and S/PDIF digital outputs and Dual-Mode XLR direct outputs.
HD147

HD147

The HD147 was a powerful amplifier head designed for heavy guitar styles. It extended the features of Flextone III amps, cabs & effects models with added modern & "other-wordly" tones, a 300-watt stereo power amp, XLR direct outs and FBV controller, MIDI & CustomTone.com support for deep editing.
FBV4

FBV4

A rugged 4-button footswitch designed for accessing channel & tap tempo functions with all Line 6 Flextone, Vetta I & II, HD147, Duoverb and PODxt family devices.
Vetta II Combo

Vetta II Combo

The Vetta II 2x12 Combo was a redesign of the flagship guitar amplifier, featuring a 150-watt stereo power amp, 70+ amp, 27 cab and 50+ effects models, A.I.R II room ambience with 6 mic models, dual amp operation, FX loop, digital, XLR & 1/4" outs and more.
Bass PODxt

Bass PODxt

The Bass PODxt was a significant new generation of the Bass POD, incorporating improved amp, cab & effects models (leveraged from Vetta and the Pro effects) and better audio performance. USB was also added for use as a computer audio interface, as well as for upcoming Line 6 software.
Bass PODxt Pro

Bass PODxt Pro

The Bass PODxt Pro was a rack mount chassis device, including all the Bass PODxt features as well as added 24-Bit AES/EBU and S/PDIF digital outputs and Dual-Mode XLR direct outputs.
Spider II 112

Spider II 112

The Spider II family of amplifiers expanded upon the best-selling Spider with 12 unique amp models and 7 different effects, (3 simultaneously) tweakable via the Smart FX knob. This 1x12 combo featured 75-watts, a custom Celestion® speaker, tuner, reverb, and a headphone out.
Spider II 210

Spider II 210

The Spider II 210 was a 120-watt, 2x10 combo member of the Spider II amplifier family.
Spider II 212

Spider II 212

The Spider II 212 was a 150-watt, 2x12 combo member of the Spider II amplifier family.
Spider II HD

Spider II HD

The Spider II 210 was a 120-watt, 2x10 combo member of the Spider II amplifier family.
FBV2

FBV2

The FBV2 was a compact, 2-button footswitch designed for switching through preset channels with POD 2.0, PODxt, Bass PODxt, Spider II, III & IV, Spider Valve, Vetta I & II, HD147 and Flextone III products.
Spider II 412 Cab

Spider II 412 Cab

The Spider II 412 cab was a robust extension speaker cabinet designed for use with Spider II and other Line 6 amps. It featured 4x12" Celestion® speakers, mono/stereo connectivity, 75-watts per side power handling and a slanted front design.
Vetta II HD

Vetta II HD

The Vetta II HD was the 150-watt stereo head version of the Vetta II amplifier.
Variax 700 Hardtail

Variax 700 Hardtail

The Variax 700 was the premium electric solidbody Variax guitar, featuring a contoured mahogany body, optional carved ash top, bone nut, pearl inlays and came in solid & transparent finishes. The Variax 700 Hardtail offered a fixed bridge.
Variax 700 Tremolo

Variax 700 Tremolo

The Variax 700 Tremolo was the same specs as the 700 Hardtail model, but offered an L.R. Baggs Tremolo bridge.
Flextone III Cab

Flextone III Cab

The Flextone III Cab was a 1x12 extension speaker cabinet designed to provide stereo operation when used with Flextone III Plus amplifier.
Vetta II Cab

Vetta II Cab

The Vetta II Cab was a 2x12 extension speaker cabinet designed for use with Vetta II amplifiers. It featured custom Celestion® speakers and mono/stereo connectivity.
2004
Variax Acoustic

Variax Acoustic

The Variax Acoustic family of guitars featured built-in models emulating 16 classic acoustics, including steel & nylon string, 12-string, blues, jazz & resonator guitars, banjo, mandola, sitar and shamisen, as well as programmable alternate tunings, mic position controls and a compressor.
FX Junkie

FX Junkie

The FX Junkie is another PODxt Model Pack set, offering 35 essential effect models including synths, filters, delays, choruses, compressors, distortions, and sample and hold.
Collector Classics

Collector Classics

The Collector Classics PODxt Model Pack add-on was designed to add a set of 18 boutique guitar combo amps, sought-after vintage heads and rare pawn-shop treasures.
Metal Shop Pack

Metal Shop Pack

The Metal Shop Pack is the PODxt Model Pack to add 18 of the heaviest of amp models from the Line 6 HD147 head.
Power Pack

Power Pack

The Power Pack is a large PODxt Model Pack including 24 vintage and modern amps, 33 essential effects and more.
Spider II 15

Spider II 15

The Spider II 15 was the budget 15-watt, 1x8" speaker combo member of the Spider II amplifier family. It offered 4 amp models, 6 Smart Control FX, tap tempo, CD/MP3 input, and headphone & direct outputs.
Spider II 30

Spider II 30

The Spider II 30 was 30-watt, 1x12 combo member of the Spider II amplifier family. It incorporated all the features of the Spider II 15, plus FBV Controller support.
PODxt Live

PODxt Live

The PODxt Live packaged all the features of PODxt into a performance-approved, steel pedalboard chassis. It offered an LCD display, oversized footswitches for preset banks & channels, 4 effects, tap tempo, tuner, on-board expression pedal, as well as a dedicated digital input for Line 6 Variax instruments.
Echo Park

Echo Park

Echo Park was the delay effect of the ToneCore Effect Module line. It featured several models based on the award-winning DL4 Delay, including several variations of analog, tape, and digital delays, as well as tap tempo and stereo ins and outs.
Uber Metal

Uber Metal

Uber Metal was the heaviest distortion effect of the ToneCore Effect Module line. It featured high-gain tones from HD147 and Vetta II including Metal, Pulverize, and Insane. Also built in were a selectable noise gate and mid-scoop control.
Tap Tremolo

Tap Tremolo

Tap Tremolo was the tremolo effect of the ToneCore Effect Module line. It featured a tap tempo feature, adjustable dynamic speed control, peak setting, depth, shape, and a choice between Opto Tremolo, Bias Tremolo, or Stereo Panning.
Constrictor

Constrictor

Constrictor was the compressor effect of the ToneCore Effect Module line. It featured 3 versatile compressor models based on classic analog compressors from the '60s, '70s and '80s.
Space Chorus

Space Chorus

Space Chorus was the chorus effect of the ToneCore Effect Module line. It featured 3 models based on vintage and modern analog effects: Chorus, Tri, and Vibrato. Included controls were speed, shape, depth and tap tempo as well as stereo ins and outs.
GuitarPort Riff Tracker

GuitarPort Riff Tracker

GuitarPort Riff Tracker was a special bundle of products for recording & jamming right on your computer. It included the GuitarPort USB audio interface, GuitarPort tone creation & editing app, RiffWorks recording software, and the unique InstantDrummer application, all to create a simple and powerful computer-based rig.
Variax Bass 700

Variax Bass 700

The Variax 700 Bass was a 4-string electric bass featuring built-in models emulating 24 classic electric & acoustic instruments and bass synths. It featured an alder body, maple neck, rosewood fingerboard and a special digital output to connect to supported Line 6 gear. Offered in Black and Sunburst finishes.
Triple Pack Bundle

Triple Pack Bundle

The Triple Pack is a promotional bundle offering three PODxt Model Packs for the price of two, including the Metal Shop, FX Junkie and Collector Classics packs.
2005
Variax 300

Variax 300

The Variax 300 was the most affordable electric guitar of the Variax family. It featured a solid agathis body, 25.5" scale length, bolt-on maple neck with Indian rosewood fingerboard, 12" fingerboard radius, and a special digital output to connect to supported Line 6 gear. Offered in Black and Sunburst finishes.
Variax Workbench

Variax Workbench

Variax Workbench is the preset editor/librarian software for Variax instruments. By connecting your Variax via the included USB interface, Workbench makes it simple to edit pickup types & positions, body type, alternate tunings, as well as organize, backup and restore customized patches right on your computer screen.
Bass PODxt Live

Bass PODxt Live

The Bass PODxt Live packaged all the features of Bass PODxt into a performance-approved, steel pedalboard chassis. It offered an LCD display, oversized footswitches for preset banks & channels, 4 effects, tap tempo, tuner, on-board expression pedal, as well as a dedicated digital input for Line 6 Variax instruments.
Spider II HD75

Spider II HD75

The Spider HD75 was the 75-watt mono head of the Spider II amplifier family.
Variax 600

Variax 600

The Variax 600 was a solid-body electric guitar with styling appointments to meet the taste of specific players, featuring a basswood body, 25.5" scale, maple neck with maple fingerboard, 9.5" fingerboard radius and a tremolo bridge. Offered in Sunburst, Vintage White, Blue and Black.
Variax Bass 705

Variax Bass 705

The Variax Bass 705 was a 5-string version of the Variax Bass 700. It was offered in Black and Sunburst finishes.
FBV-Express

FBV-Express

The FBV Express was a compact and more affordable version of the FBV & FBV Shortboard. It featured 4 effects/channel footswitches, on-board expression pedal, tuner and tap tempo control.
Dr. Distorto

Dr. Distorto

Dr. Distorto was the distortion/feedback/sustainer effect of the ToneCore Effect Module line. It featured classic, distortion tones with incredible sustain at any level using an innovative harmonic feedback circuit.
Liqua Flange

Liqua Flange

Liqua Flange was the flanger effect of the ToneCore Effect Module line. It featured selectable Digital, Liquid, and Analog models all with pass-through-zero settings delivering classic studio flange sounds and beyond.
Otto Filter

Otto Filter

Otto Filter was the envelope filter effect of the ToneCore Effect Module line. It featured a cornucopia of auto wah filter effects with band-pass, low-pass, and custom Line 6 Twin Filter models for ultra-funky & experimental sounds.
Roto Machine

Roto Machine

Roto Machine was the rotary speaker effect of the ToneCore Effect Module line. It featured huge, three-dimensional rotating speaker sounds, from dreamy clean to swirling overdrive.
Verbzilla

Verbzilla

Verbzilla was the reverb effect of the ToneCore Effect Module line. It featured studio-grade algorithms for 11 amazing reverb models, from classic guitar amp-style spring reverb to high-end studio favorites.
TonePort UX1

TonePort UX1

The TonePort family devices were bus-powered USB audio interfaces for Mac® & Windows®, with support for major DAW recording applications. Included was the GuitarPort & (optional) GuitarPort Plug-in software. TonePort UX1 offered guitar, mic, monitor & line inputs and stereo headphone and 1/4" analog outputs.
TonePort UX2

TonePort UX2

The TonePort UX2 USB audio interface included all the features of TonePort UX1, as well as a 2nd XLR mic input, phantom power, assignable VU meters, and individual master & headphone volume controls.
Spider II 412 MK II

Spider II 412 MK II

The Spider II 412 MkII cab was a robust extension speaker cabinet designed for use with Spider II and other Line 6 amps. It featured 4x12" Celestion® speakers, mono/stereo connectivity, 75-watts per side power handling and a slanted front design.
2006
Variax 300

Variax 300

This Variax 300 was the affordable solid-body electric in a Vintage Sunburst finish.
LowDown LD150

LowDown LD150

The LowDown series amplifiers were designed for electric bass, featuring 5 classic bass amp models, 36 programmable presets, 5 synth bass effects, SmartFX control, built-in compressor & tuner, with preamp, direct, speaker & headphone outputs and FBV foot controller support. LowDown LD150 was a 150-watt, 1x12 combo amplifier.
LowDown LD175

LowDown LD175

The LowDown LD175 included all features of the LD150, but was a 175-watt combo amplifier with a 15" speaker and high frequency horn.
LowDown LD300 Pro

LowDown LD300 Pro

The LowDown LD300 Pro included all features of the LD150, but was a powerful 300-watt combo amplifier with a 15" speaker and high frequency horn.
Variax Acoustic 300 Steel

Variax Acoustic 300 Steel

The Variax Acoustic 300 guitars were offered as affordable alternatives to the Acoustic 700 lineup, featuring 2 on-board, blend-able acoustic guitar models, built-in tuner, mic placement emulation, compressor and reverb, with a single-cutaway mahogany body, spruce top, mahogany neck with rosewood fingerboard. The Acoustic 300 Steel was a steel-string.
Variax Acoustic 300 Nylon

Variax Acoustic 300 Nylon

The Variax Acoustic 300 Nylon offered all the features of the Acoustic 300 Steel in a nylon-string guitar.
Floor POD

Floor POD

The Floor POD was an affordable, foot-controllable unit that included tones from POD 2.0. It featured 12 classic amp models, a collection of mono & stereo effects, simple SmartFX control, 3 preset/effects footswitches, an on-board expression pedal & tuner, 64 programmable presets, MP3/CD input, and stereo 1/4" and phones outputs.
Spider III 15

Spider III 15

The Spider III 15 was the budget 15-watt mono, 1x8" speaker combo member of the Spider III amplifier family. It offered 4 amp models, 6 Smart Control FX (2 simultaneously), built-in Boost and noise gate, tap tempo, CD/MP3 input, and headphone & direct outputs.
Spider III 30

Spider III 30

The Spider III 30 offered all features of the Spider III 15, in a 30-watt mono, 1x12 combo amp with a custom Celestion® speaker and support for FBV foot controllers.
Spider III 75

Spider III 75

The Spider III 75 offered all features of the Spider III 30 in a 75-watt mono, 1x12 combo amplifier with 12 amp models, 7 smart control FX (3 simultaneously) and 200 artist-crafted presets.
Spider III 120

Spider III 120

The Spider III 120 offered all features of the Spider III 75 in a 120-watt stereo, 2x10 combo amplifier with Celestion® speakers, and 250 artist-crafted, 150 song-based & 36 user programmable presets.
Spider III 150

Spider III 150

The Spider III 150 offered all features of the Spider III 120 in a 150-watt stereo, 2x12 combo amplifier.
Spider III HD75

Spider III HD75

The Spider III HD75 offered all features of the Spider III 75 in a 75-watt mono amplifier head.
Spider III HD150

Spider III HD150

The Spider III HD150 offered all features of the Spider III 150 in a 150-watt stereo amplifier head.
TonePort KB37

TonePort KB37

TonePort KB37 incorporated all the features of the TonePort UX2 USB audio interface, with the addition of an integrated, 37-key, full-sized, velocity-sensitive keyboard, on-board pitch bend wheel & octave up/down switching, and several software-assignable controls.
LowDown Studio 110

LowDown Studio 110

The LowDown Studio 110 was a compact 75-watt, 1x10 bass combo amplifier, featuring 4 bass amp models, synth bass, opto compressor, 4 programmable presets, jam-along CD/MP3 input, and XLR direct, preamp and headphone outputs.
Bass Expansion Pack

Bass Expansion Pack

Line 6 offers several PODxt "Model Pack" sets, which are optional add-ons to expand the models offered for PODxt devices, as well as other Line 6 products. The Bass Expansion Pack includes 28 bass amps and 22 bass cabs paired with mic selections for perfect bass tones.
ToneCore Modules

ToneCore Modules

ToneCore Modules, derived from the popular Line 6 M-Series effects, were the modular effects units designed to mount within the ToneCore Dock pedal chassis. The line included: Constrictor, Crunch Tone, Dr. Distorto, Echo park, Liqua Flange, Otto Filter, Roto Machine, Space Chorus, Tap Tremolo, Uber Metal and Verbzilla.
ToneCore Mono and Stereo Docks

ToneCore Mono and Stereo Docks

The ToneCore Dock was a rugged die-cast metal chassis designed to house the individual ToneCore Effects Modules. The Docks were offered in mono or stereo, into which you could interchange any of the 11 ToneCore Modules. Each Dock included dual-action switching & 9-volt operation.
GuitarPort XT

GuitarPort XT

GuitarPort XT was a retail bundle packaging of the GuitarPort USB audio interface + GearBox software. It included improved device drivers, support for Intel® based Mac® computers, added features within the revised GearBox software, and support for the optional GearBox Model Pack Add-Ons & Plug-in.
GearBox Plug-in Silver Bundle

GearBox Plug-in Silver Bundle

The GearBox Plug-in Silver Bundle included the stereo in/out TonePort DI USB audio interface plus the GearBox modeling software. This Silver Bundle included 18 guitar amp, 24 cab, 5 bass amp & cab, 6 preamp and 29 effects models from PODxt, for use with Mac® and Windows® DAW applications.
GearBox Plug-in Gold Bundle

GearBox Plug-in Gold Bundle

The GearBox Plug-in Gold Bundle included all features of the Silver Bundle, with a larger total of 78 guitar amp, 24 cab, 28 bass amp, 22 bass cab, 6 preamp and 80 effects models from PODxt.
2007
Bass Floor POD

Bass Floor POD

Bass Floor POD offered the same functionality as the Floor POD, but with 5 classic bass amp models & set of bass effects from the POD 2.0 tone set.
Floor POD Plus

Floor POD Plus

Floor POD Plus included all the features of the Floor POD, and upped the ante with 32 amp models, a larger set of cab & effects models, additional dedicated control knobs & footswitches, MIDI in/out and USB connectivity for use with the available Vyzex preset editor/librarian software.
Pocket POD

Pocket POD

Pocket POD is the ultra-compact, battery-powered processor with POD 2.0 technology. It includes 300 artist-crafted presets, 32 amp, 16 cab and 16 effects models, MP3/CD input, amp, direct and stereo phones outputs, and USB connectivity for use with the available Vyzex preset editor/librarian software.
TonePort GX

TonePort GX

TonePort GX was the smallest & simplest member of the TonePort USB audio interface family. It offered guitar input, 1/8" stereo line/headphone output and a single volume knob. As with other TonePort devices, GuitarPort software was included.
TonePort UX8

TonePort UX8

TonePort UX8 was the studio-friendly, rack mount version of the TonePort family. It featured powerful I/O: 8 analog ins, each with XLR & 1/4" inputs, trim control, pad, phantom power and 8 1/4" output jacks. Also included were two 1/4" instrument ins, S/PDIF in/out, 2 stereo headphone outs and USB 2.0.
Spider Valve 112

Spider Valve 112

Spider Valve amplifiers were the result of a collaborative effort with tube amp guru Reinhold Bogner, featuring tube preamp and power amp sections plus Line 6 modeling. Included were 12 amp models, built-in effects & tuner, FBV support and preamp & direct outputs. The 112 was a 40-watt, 1x12 combo.
Spider Valve 212

Spider Valve 212

The Spider Valve 212 included all of the features of the Spider Valve 112 in a 40-watt, 2x12 combo amplifier.
POD X3

POD X3

The POD X3 family devices featured increased DSP power, dual signal path for up to 2 amps and 18 simultaneous effects usage, 78 amps, 98 effects and new mic preamp & bass amp models, large display, XLR Mic input, S/PDIF output, multi-channel USB audio and POD Farm plug-in software.
POD X3 Live

POD X3 Live

POD X3 Live offered all the POD X3 features in a road-ready floorboard, with heavy-duty footswitches and expression pedal, plus Variax & CD/MP3 Aux input, stereo FX loop, XLR & 1/4" balanced outputs and MIDI in/out.
Spider Valve HD100

Spider Valve HD100

The Spider Valve HD100 offered all the features of the Spider Valve 112 and 212 models in a higher power 100-watt amp head.
Line 6 412VS-T Slant Cab

Line 6 412VS-T Slant Cab

The 412VS Cabs were heavy-duty, mono/stereo 4x12 extension cabinets designed for use with Spider Valve, HD147 and Vetta amplifiers, featuring Celestion® Vintage 30 speakers. 412VS-T featured a slanted front, for use as a single cab, or on top of a Line 6 412VS-B for a full stack.
Line 6 412VS-B Straight Cab

Line 6 412VS-B Straight Cab

The 412VS-B was a straight-front version of the 412VS-T cabinet, designed for use as a single cab, or with a 412VS-T on top for a full stack.
2008
Spider Jam

Spider Jam

Spider Jam featured the essentials of a Spider III 75-watt, 1x12 combo amp with several added practice & recording features, including a tweeter for full-range audio, 100 CD-quality recorded jam tracks, 24 minutes of recording time, and XLR mic and 2nd instrument inputs with dedicated preamp, compressor & EQ.
XDS-95

XDS-95

The XDS and XDR products were UHF, 24-bit digital wireless systems for guitar, vocals and other instruments, offering 900 MHz operation, Q-Diversity™ antennas, multiple user-selectable channels, full-frequency response and more. The XDS-95 included one XDT1 belt-pack transmitter and one XDR1 stompbox-style receiver, featuring a 150-foot range.
XDR-95

XDR-95

The XDR-95 was a wireless guitar system, consisting of one XDT1 belt-pack transmitter and one XDR4 rack-mount receiver, featuring a 300-foot range, attachable antennas, multiple LED front panel displays, and 1/4" and XLR balanced outputs.
XDR-952

XDR-952

The XDR-952 was a wireless vocal system, consisting of one XDT4 mic/instrument input, belt-pack transmitter and one XDR4 rack-mount receiver.
XDR-957

XDR-957

The XDR-957 was a wireless lav mic system based on the XDR-95 platform.
XDS Plus

XDS Plus

The XDS Plus was a digital wireless guitar system consisting of one XDT1 transmitter and one XDR2 stompbox-style receiver. It featured a 200-foot range and 1/4" balanced audio and tuner outputs.
Micro Spider

Micro Spider

Micro Spider was an ultra-portable, 6-watt, 1x6.5" speaker, battery-powered guitar amp, featuring 4 amp tones, 1 acoustic guitar tone, 6 Smart Control FX, built-in tuner, guitar, mic and jam along CD/MP3 inputs, direct output and included AC adapter.
JM4 Looper

JM4 Looper

The JM4 Looper was essentially a Spider Jam amplifier in a pedal format, offering all the amps, FX, jam tracks, artist & song presets, and instrument & mic inputs and outputs. Also included was an SD card slot for recording & audio file export, and a dedicated 4-footswitch looper.
M13 Stompbox Modeler

M13 Stompbox Modeler

The M13 Stompbox Modeler was a 15-footswitch, multi-effects pedalboard device, featuring over 100 of classic and new Line 6 distortions, reverbs, modulators, delays, filters and more. It offered up to 4 FX simultaneously, 28-second looper, 48 programmable scenes, LCD edit screens, tuner, dual expression pedal support and MIDI in/out.
LowDown LD15

LowDown LD15

The LowDown LD15 was the affordable 15-watt, 1x8" combo of the LowDown bass amp family, offering 4 bass tones, 3 Smart Control FX, 4 programmable channels, instrument and jam-along CD/MP3 inputs and a headphone/direct output.
Pocket POD Express

Pocket POD Express

Pocket POD Express was a further streamlined version of the Pocket POD, with 5 amp tones, delay/reverb and Chorus/tremolo/flanger via 2 Smart Control FX knobs,MP3/CD input, and four AAA batteries to get you powered up.
ToneCore DSP Developer Kit

ToneCore DSP Developer Kit

The ToneCore DSP Developer Kit was a platform for DSP programmers to do sound design and develop their own digital effects pedals. The kit included a USB ToneCore Dock, containing Freescale Symphony software & audio circuitry, which connects directly to a Windows® PC, allowing easy-access programming and instant audio preview.
BackTrack

BackTrack

The BackTrack was a portable digital recorder designed to easily capture audio to flash memory by auto-sensing audio signal levels. It offered 12 hours recording time of 48kHz .wav audio to its 1GB internal flash memory, with a USB 2.0 connection for transfer to your computer.
BackTrack +Mic

BackTrack +Mic

BackTrack +Mic offered all the features of the BackTrack recorder, with an added built-in microphone and stereo headphone output.
Alchemist™ 112

Alchemist™ 112

The Alchemist line of amplifiers were designed by amp guru Reinhold Bogner and distributed by Line 6 to offer a high quality, reasonably priced, all-tube amplifier. They featured 40-watt/20-watt operation, 2 channels, built-in reverb & delay, FX loop, and 4-button footswitch. The 112 was a 1x12 combo.
Alchemist™ 212

Alchemist™ 212

The Alchemist 212 was the switchable 40-watt/20-watt, 2x12 combo amp version of the Alchemist line, including Celestion® G12H and Greenback speakers.
Alchemist™ HD

Alchemist™ HD

The Alchemist HD was the switchable 40-watt/20-watt head version of the Alchemist amplifier line.
Alchemist™ 212 Ext. Cab

Alchemist™ 212 Ext. Cab

The Alchemist 212 Ext. Cab was the 2x12 speaker cabinet for use with Alchemist guitar amplifiers, including Celestion® G12H and Greenback speakers.
POD Studio UX1

POD Studio UX1

The POD Studio line was a successor to the TonePort family of USB audio interfaces, with a change from GearBox application to the new, improved POD Farm modeling and DAW plug-in software. POD Studio UX1 offered guitar, mic, monitor & line inputs and stereo headphone and 1/4" analog outputs.
POD Studio UX2

POD Studio UX2

The POD Studio UX2 included all the features of POD Studio UX1, as well as a 2nd XLR mic input, phantom power, assignable VU meters, and individual master & headphone volume controls.
POD X3 Pro

POD X3 Pro

The POD X3 Pro was a rack mount chassis device, including all the POD X3 Live features (sans pedalboard) as well as an additional set of instrument and mic inputs, Variax input, 24-Bit AES/EBU and S/PDIF digital outputs, 2 unprocessed 1/4" and stereo XLR direct outputs.
LowDown HD400

LowDown HD400

The LowDown HD400 was a rack-mount, 400-watt head version member of the Lowdown bass amp family, featuring 5 bass amp models, 5 bass effects, built-in tuner, jam-along CD/MP3 input, preamp and direct outputs, and FBV foot controller support.
LowDown HD750

LowDown HD750

The LowDown HD750 was a rack-mount, 750-watt head version of the Lowdown HD400 bass amplifier.
LowDown LD400 Pro

LowDown LD400 Pro

The LowDown LD400 Pro was a combo version of the Lowdown HD400 bass amplifier including 2x10" speakers and a compression driver horn.
POD Farm

POD Farm

POD Farm is the modeling software suite that effectively replaced the GearBox application. A stand-alone application as well as an optional DAW plug-in set for Mac® & Windows®, POD Farm features the guitar, bass & studio models from POD X3. "Model Pack" expansion sets were also offered as optional add-ons.
ToneCore Programmable Module

ToneCore Programmable Module

For use with the DSP Developer Kit, the ToneCore Programmable Module was customizable and stored DSP code within its Freescale microcontroller. This allowed DSP development to be performed on the PC, with a programming tool then used to FLASH the MCU with the new DSP code through the Developer ToneCore Dock.
POD Studio GX

POD Studio GX

POD Studio GX is the smallest & simplest member of the POD Studio family. It offers guitar input, 1/8" stereo line/headphone output and a single volume knob.
POD Farm Platinum

POD Farm Platinum

POD Farm Platinum was a premium bundle including the POD Farm application, POD Farm Plug-in license, and all optional Model Pack expansions for a total of 250 models.
2009
LowDown 410 Cab

LowDown 410 Cab

The LowDown 410 Cab was an extension speaker cabinet for LowDown bass amplifiers, including 4x10" premium Eminence® speakers and a high frequency compression driver horn and cross-over level control.
POD Studio KB37

POD Studio KB37

POD Studio KB37 incorporated all the features of the POD Studio UX2 USB audio interface, with the addition of an integrated, 37-key, full-sized, velocity-sensitive keyboard, on-board Pitch bend wheel & Octave up/down switching, and several software-assignable controls.
XDR-955

XDR-955

The XDR-955 was a wireless vocal system, consisting of one XDR4 rack-mount receiver and one XDH4 transmitter microphone (a premium, moving-coil dynamic, cardioid microphone with built-in transmitter) offering a 300-foot range.
XDR-959

XDR-959

The XDR-959 was a wireless vocal system, consisting of one XDR4 rack-mount receiver and one XDR4 mic/instrument input, belt-pack transmitter, offering a 300-foot range.
Relay G30

Relay G30

The Relay line of digital 2.4 GHz wireless systems features full-range sound with cable tone simulation, low noise and a simple set of controls. The Relay G30 guitar system includes a stompbox style receiver and belt-pack transmitter with 100-foot range, 6 channels, two 1/4" instrument inputs and one 1/4" output.
Spider IV 15

Spider IV 15

The Spider IV 15 was the 15-watt mono, 1x8" speaker combo of the Spider IV amplifier family, offering 4 amp models, 6 smart control FX (2 simultaneously), boost, noise gate, tap tempo, CD/MP3 input, headphone & direct outputs, FBV support and free access to Spider Online resource hub.
Spider IV 30

Spider IV 30

The Spider IV 30 offered all features of the Spider IV 15, in a 30-watt mono, 1x12 combo amp with, 12 amp models, 7 Smart Control FX a custom Celestion® speaker.
Spider IV 75

Spider IV 75

The Spider IV 75 offered all features of the Spider IV 30 in a 75-watt mono, 1x12 combo amplifier with a built-in looper and 300 artist-crafted, 200 song-based & 64 user programmable presets.
Spider IV 120

Spider IV 120

The Spider IV 120 offered all features of the Spider IV 75 in a 120-watt stereo, 2x10 combo amplifier.
Spider IV 150

Spider IV 150

The Spider IV 150 offered all features of the Spider IV 120 in a 150-watt stereo, 2x12 combo amplifier.
Spider IV HD150

Spider IV HD150

The Spider IV HD150 offered all features of the Spider IV 150 in a 150-watt stereo amplifier head.
FBV Shortboard MkII

FBV Shortboard MkII

The FBV MkII line was an advanced family of foot controllers, including rugged footswitches & on-board pedal, RJ-45 & USB connectivity, MIDI over USB, and FBV Control software for customization of controller mapping. FBV Shortboard MkII featured 13 footswitches, on-board pedal, expression pedal input and large LCD display.
FBV Express MkII

FBV Express MkII

FBV Express MkII is the simpler foot controller device of the FBV MkII line, with 4 large footswitches, on-board pedal and built-in tuner with LED display.
M9 Stompbox Modeler

M9 Stompbox Modeler

The M9 Stompbox Modeler was a down-sized version of the M13 Stompbox Modeler multi-effects device, featuring a compact chassis, 75+ effects total (3 simultaneously), 6 programmable scenes, tap tempo, 28-second looper, 2 expression pedal inputs, LCD display, stereo in/out and MIDI in/out.
Spider Valve MkII 112

Spider Valve MkII 112

The Spider Valve MkII succeeded the original Spider Valve amplifier family, offering an all-tube + modeling design with additional and improved effects models, pre-post FX routing, Looper, FBV MkII controller support, MIDI in/out and an editor/librarian software. The 112 model was a 40-watt combo with one 12" Celestion® speaker.
Spider Valve MkII 212

Spider Valve MkII 212

The Spider Valve MkII 212 was a 40-watt, 2x12 combo version of the Spider Valve MkII amplifier.
Spider Valve MkII HD100

Spider Valve MkII HD100

The Spider Valve MkII HD100 was a 100-watt head version of the Spider Valve MkII amplifier.
Pocket POD Pack

Pocket POD Pack

The Pocket POD Pack was a retail boxed bundle that included a Pocket POD, 1/4" guitar cable, 1/8" auxiliary cable, earbuds, DC-2 power adapter, USB cable, and a CD-ROM loaded with jam tracks and the Vyzex tone-editing software.
2010
MIDI Mobilizer

MIDI Mobilizer

The MIDI Mobilizer was a mobile MIDI Interface for Apple® iOS devices, providing 5-pin MIDI input & output and the MIDI Memo Recorder iOS app for recording, playback and back-up & restoration of MIDI information on the go.
Relay G50

Relay G50

The Relay G50 was a guitar wireless system which included a stompbox style receiver and belt-pack transmitter with a 200-foot range, 12 channels, two instrument inputs and two 1/4" outputs.
Relay G90

Relay G90

The Relay G90 was a guitar wireless system which included a rack-mount receiver and belt-pack transmitter featuring attachable antennas, 300-foot range, 12 channels, two instrument inputs and two 1/4" outputs and one XLR output.
XD-V70

XD-V70

The XD-V family was the 4th generation of 2.4 GHz digital wireless systems, featuring full-frequency response, wide dynamic range and superior transient response. XD-V70 was a 12-channel, 1/2-unit rack size receiver with a 300-foot range, 2 mountable antennas and included rack-mount kit.
XD-V70L

XD-V70L

The XD-V70L was a full wireless mic system including the XD-V70 receiver, lavalier microphone with tie-clip & windscreen, and a belt-pack transmitter with protective storage case.
XD-V30L

XD-V30L

The XD-V30L digital wireless system was the same kit as the XD-V30, substituting a clip-on lavalier microphone in place of the XD-V30's handheld mic.
POD HD 300

POD HD 300

The POD HD family introduced advancements such as 16 all-new HD amp models, 80+ effects, 512 preset locations, 24-second looper, USB 2.0 audio, and free editor/librarian software. The POD HD 300 floor unit included an expression pedal, LCD display, Variax input, stereo XLR and L6 LINK digital outputs.
POD HD 400

POD HD 400

The POD HD 400 floor device included all features of the HD 300, with dedicated preset bank footswitches, 10 additional effects models, stereo FX loop, and input for a 2nd expression pedal.
POD HD 500

POD HD 500

The POD HD 500 was the largest floor POD HD, incorporating all features of HD 400, as well as over 100 effects (8 simultaneously), 48-second looper, a larger set of footswitches, large display, dual signal path capability, enhanced deep parameter editing, and MIDI in/out.
DT50 112

DT50 112

The DT all-tube guitar amplifiers integrated HD amp modeling and L6 LINK digital input, offering elaborate control of its topology options via POD HD devices for a combined high-performance guitar system. DT50 112 was a 50-watt, 1x12 combo with 2 channels, FX loop, XLR direct out and MIDI in/out.
DT50 212

DT50 212

The DT50 212 was a 50-watt, 2x12 combo version of the DT50 amplifier featuring 2 Celestion® speakers.
DT50 head

DT50 head

The DT50 head was a head version of the DT50 amplifier.
DT50 412 Cab

DT50 412 Cab

The DT50 412 Cab was a 4x12 extension speaker cabinet designed for use with DT amplifiers. It incorporated a combination 2 Celestion® Vintage 30 and 2 Custom Celestion® G12H90 speakers.
James Tyler Variax JTV-69

James Tyler Variax JTV-69

The James Tyler Variax family was a line of electric modeling guitars designed by famed luthier James Tyler, offering improved playability, vintage-meets-modern styling and updated Line 6 Variax HD modeling. JTV-69 featured SSH pickup configuration, Alder body, vintage-style Tyler neck and a custom tremolo bridge.
James Tyler Variax JTV-89

James Tyler Variax JTV-89

The James Tyler Variax JTV-89 was an electric for heavier styles, with Tyler-designed, high-output alnico humbucking pickups, 3-piece maple neck, 24-fret rosewood fingerboard, reverse headstock and a custom wraparound bridge.
James Tyler Variax JTV-59

James Tyler Variax JTV-59

The James Tyler Variax JTV-59 offered classic styling with PAF-style alnico humbuckers, mahogany body, maple top, and a custom wraparound bridge.
XD-V30

XD-V30

The XD-V30 was a complete wireless microphone system including a 6-channel, 100-foot range, low profile chassis receiver, a handheld microphone with built-in transmitter, and portable carrying case. The microphone also featured Line 6 modeling technology to deliver a sound like the world's most popular live-sound microphone.
2011
M5 Stompbox Modeler

M5 Stompbox Modeler

The M5 Stompbox Modeler is the most portable of the M-Series effects pedals, with access to all 100+ of the M-Series models, one at a time. It included stereo in/out, tuner, 24-second looper, expression pedal input, tap tempo, footswitch-accessed programmable presets, and MIDI in/out.
XD-V70HS

XD-V70HS

The XD-V70HS was a full wireless mic system including the XD-V70 2.4GHz digital receiver, omnidirectional condenser headset microphone with windscreen, and a belt-pack transmitter with protective storage case.
XD-V30HS

XD-V30HS

The XD-V30HS digital wireless system was the same kit as the XD-V30, substituting a cardioid condenser headset microphone in place of a handheld mic.
POD HD

POD HD

POD HD was the classic "kidney bean" desktop POD HD modeler device, including the core features of the line: Full set of HD amp & effects models, LCD screen, 1/4" instrument & XLR mic inputs, USB 2.0 audio, FBV MkII controller support, and stereo 1/4" & S/PDIF outputs.
MIDI Mobilizer II

MIDI Mobilizer II

The MIDI Mobilizer II was the successor to the original MIDI Mobilizer iOS interface, offering CoreMIDI support, the Apple® standard for iOS MIDI, for improved compatibility with more iOS music apps and MIDI instruments & devices.
DT25 112

DT25 112

The DT25 112 was a 25-watt, 1x12 combo version of the DT amplifier family, including all the features of the DT50 amps in a lower wattage, EL84 tube design.
DT25 Cab

DT25 Cab

The DT25 Cab was a compact, 1x12 extension speaker cabinet for use with DT25 amplifiers, including a 12" Celestion® speaker.
DT25 Head

DT25 Head

The DT25 Head was a head version of the DT25 amplifier, typically matched up with the DT25 1x12 Cab for a small but powerful setup.
POD HD Pro

POD HD Pro

POD HD Pro was the studio-friendly rack-mount version of the POD HD line with additional I/O, including stereo FX loop, 1/4" instrument, XLR mic & Variax in, stereo S/PDIF, AES-EBU & L6 LINK digital in/out, MIDI in/out, stereo 1/4" & XLR outs, and a 1/4" dry out.
Mobile In

Mobile In

The Mobile In was a high quality, 24-bit/48kHz audio interface for Apple® iOS mobile devices. It was compatible with iOS music apps for recording and playback, and included guitar & stereo line inputs, 6-foot guitar cable, and the Line 6 Mobile POD iOS modeling app.
P180 Antenna

P180 Antenna

The P180 Antenna is an active UHF wireless directional antenna for use with Line 6 2.4GHz receivers including Relay G55, Relay G90, XD-V55, XD-V75 and XD-V70. Compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by P180 offers enhanced reception and greater rejection of unwanted RF signals.
P360 Antenna

P360 Antenna

The P360 Omni Active Antenna Pair of omni-directional paddle antennas are for use with Line 6 XD-V70 and Relay G90 wireless systems. It features an on-board amplifier with gain switch to compensate for cable signal loss, and a microphone stand mount.
Totally Amp'd Pack

Totally Amp'd Pack

The Totally Amp'd Pack was a Spider IV 15 amplifier bundle, including, a gig bag, headphones, guitar string set & peg winder, guitar cable & strap, electric tuner, 3 picks and an instructional DVD.
Spider Online

Spider Online

Spider Online was a free resource for owners of any Spider amplifier, offering hundreds of lessons (with tabs, audio samples and tones), custom tones created by Line 6 artists and Spider amp users, and jam tracks, bass and drum grooves, and drum loops played by top L.A. and Nashville session musicians. NOTE: Some content required Flash, which is no longer supported by Adobe as of January 12, 2021. That content may be blocked by Adobe.
2012
XD-V75HS (BLK)

XD-V75HS (BLK)

The XD-V75HS (BLK) is the same wireless mic system as the XD-V75, but with a black condenser headset microphone and belt-pack transmitter in place of the XD-V75's handheld mic.
XD-V75HS (TAN)

XD-V75HS (TAN)

The XD-V75HS (TAN) is the same wireless mic system as the XD-V75, but with a tan colored condenser headset microphone and belt-pack transmitter in place of the XD-V75's handheld mic.
XD-V75L

XD-V75L

The XD-V75L is the same wireless mic system as the XD-V75, but with a premium, clip-on lavalier microphone and belt-pack transmitter in place of the XD-V75's handheld mic.
XD-V75TR

XD-V75TR

The XD-V75TR is a wireless system including the 300-foot range, 1/2-unit rack size XD-V75 digital receiver and TBP12 belt-pack transmitter with instrument and mic inputs. This system also includes 9 custom Line 6 EQ filter models to optimize your sound.
Mobile Keys 25

Mobile Keys 25

The Mobile Keys 25 was the first-ever MIDI keyboard compatible with iOS devices and Mac® & Windows® computers. It featured 25 velocity-sensitive keys, pitch & mod wheels, volume & pan knobs, octave up/down buttons, 1/4" expression pedal & sustain pedal jacks, USB port & an iOS device cable.
Mobile Keys 49

Mobile Keys 49

The Mobile Keys 49 offered all the features of the Mobile Keys 25 in a larger 49-key device.
XD-V35L

XD-V35L

The XD-V35L is the same wireless mic system as the XD-V35, but with a premium, clip-on lavalier microphone and TBP06 belt-pack transmitter in place of the XD-V35's handheld mic.
XD-V55HS

XD-V55HS

The XD-V55HS is the same wireless mic system as the XD-V55, but with a black condenser headset microphone and TBP12 belt-pack transmitter in place of the XD-V55's handheld mic.
XD-V55L

XD-V55L

The XD-V55L is the same wireless mic system as the XD-V55, but with a clip-on lavalier condenser microphone and TBP12 belt-pack transmitter in place of the XD-V55's handheld mic.
StageSource L3s

StageSource L3s

The StageSource was a line of professional live sound active monitors with unique "Smart Speaker" technology, featuring live & reference sound optimization modes, L6 LINK digital intelligent network connectivity, and road-worthy construction. The StageSource L3s was the 1,200-watt Subwoofer of the line with 2x12" low-frequency drivers.
StageSource L3t

StageSource L3t

The StageSource L3t was a 1,400-watt PA tower speaker, with 2x10" low-frequency drivers and 1" high-frequency driver, integrated multi-channel mixer (with EQ, feedback suppression, and more), and L6 LINK scalable network connectivity.
StageSource L3m

StageSource L3m

The StageSource L3m was a 3-way, tri-amped, 1,400-watt, tower/monitor speaker with 2x10" low-frequency drivers & 1" high-frequency driver, equally capable as a floor monitor, front of house speaker, backline amp, or even a standalone PA system. It included DSP modeling, an XLR/TRS & stereo auxiliary inputs, L6 LINK connectivity.
StageScape M20d

StageScape M20d

The StageScape M20d was a 20-channel digital audio mixer with a large, interactive touchscreen interface, auto-sensing inputs and outputs, built-in processing, USB/SD card & USB audio recording, and remote control via Apple® iPad®. The M20d also included L6 LINK intelligent networking for scalable connectivity with StageSource active speakers.
Relay G55

Relay G55

The Relay G55 was a 4th generation Line 6 digital guitar wireless system, which included a 1/2 rack size receiver and belt-pack transmitter with a 300-foot range, 12 simultaneous channels, XLR and 1/4" outputs.
James Tyler Variax JTV-59P

James Tyler Variax JTV-59P

The JTV-59P was a single-cutaway, set-neck electric guitar addition to the Variax family. It featured two P-90 soapbar pickups for a classic look and vintage tone, ideal for classic edge-of-breakup blues, modern rock and more. Offered in Gold Top and Black finishes.
James Tyler Variax JTV-69S

James Tyler Variax JTV-69S

The JTV-69S was a traditional styled, 3-single coil pickup addition to the Variax family. It was offered with a tremolo bridge and in Three-tone Sunburst, Black, Shoreline Gold or Olympic White.
XD-V75

XD-V75

The XD-V75 is a full wireless mic system including the 300-foot range, 1/2-unit rack size XD-V75 digital receiver, dynamic handheld microphone with built-in transmitter, protective storage case and rack-mount kit. This system also includes Line 6 modeling to emulate the sound of 10 classic vocal mics.
XD-V35

XD-V35

The XD-V35 is a one-step setup, affordable, wireless mic system including a 275-foot range, table-top digital receiver & handheld microphone with built-in transmitter. This system features 6-channel operation and Line 6 modeling to emulate a classic "58" vocal mic sound.
XD-V55

XD-V55

The XD-V55 is a mid-priced, complete wireless mic system featuring 300-foot range, 1/2-unit rack size, 12-channel, XD-V55 digital receiver, handheld microphone with built-in transmitter, and includes a rack-mount kit. This system also included 3 EQ/Filter models for tone optimization.
XD-8 Antenna Distribution

XD-8 Antenna Distribution

The XD-AD8 is a 2.4GHz wireless antenna splitter/distribution system (2 in x 8 out) allowing up to 8 wireless receivers to share the same pair of antennas, providing flexibility for multi-wireless installations. It is compatible with Line 6 XD-V75, XD-V70, XD-V55, Relay G90 and Relay G50 systems.
2013
James Tyler Variax JTV-89F

James Tyler Variax JTV-89F

The JTV-89F was the JTV-89 model Variax guitar with a Floyd Rose licensed, double-locking tremolo system added.
StageSource L2m

StageSource L2m

The StageSource L2m was a bi-amped, 800-watt, monitor speaker with 1x10" low-frequency driver & 1" high-frequency driver, equally capable as a floor monitor, PA or solo instrument speaker. It included 6 "Smart Speaker" modes with sound optimization, an XLR/TRS & stereo auxiliary inputs, and L6 LINK connectivity.
StageSource L2t

StageSource L2t

The StageSource L2t was a bi-amped, 800-watt speaker with 1x10" low-frequency driver & 1" high-frequency driver, designed for use either as pole-mounted or as a floor monitor. It included 6 "Smart Speaker" modes with sound optimization, 2x1/4" instrument, 1x1/4" line & 1 x stereo inputs, and L6 LINK connectivity.
Sonic Port

Sonic Port

Sonic Port was the high quality, 24bit/48kHz audio interface for 30-pin and Lightning port Apple® iOS devices. It came with a free license for the Mobile POD iOS app, instant access to features within the Jammit guitar app, and compatibility with major music apps for recording and playback.
V75-SC

V75-SC

The V75-SC is an expansion kit to add a premium super-cardioid capsule to and XD-V75 digital wireless handheld mic system. It includes a super-cardioid capsule, custom hard-shell case, chrome mic grille, black mic grille, extra batteries and mic clip.
V75-40V

V75-40V

The V75-40V is a hyper-cardioid wireless mic which combines Line 6 digital wireless technology with the renowned Earthworks® WL40V premium hyper-cardioid capsule, delivering studio quality sound and outstanding live stage performance.
POD HD 500X

POD HD 500X

POD HD 500X was an updated version of the POD HD 500 floor modeling device, incorporating all the features of the POD HD 500, with extra DSP horsepower added to provide the use of additional simultaneous effects, several added amp & effects models, and improved multi-color, LED-illuminated footswitches.
POD HD Pro X

POD HD Pro X

POD HD Pro X was an updated version of the POD HD Pro rack-mount modeling device, incorporating all the features of the POD HD Pro, with extra DSP horsepower added to provide the use of additional simultaneous effects, and several added amp & effects models.
2014
AMPLIFi 75

AMPLIFi 75

The AMPLIFi guitar amplifier family uniquely combined 200+ amp & effects models, Bluetooth wireless streaming music playback, remote control via an iOS/AndroidTM mobile app, and a huge cloud library of tone-matching presets. AMPLIFi 75 was a 75-watt combo with a 5-speaker stereo design, Aux & Phones outputs, and USB audio.
AMPLIFi 150

AMPLIFi 150

The AMPLIFi 150 was a stout, 150-watt combo version of the AMPLIFi 75 modeling amp, with a 12" Celestion speaker at the heart of its 5-speaker stereo set & FBV controller support.
AMPLIFi FX100

AMPLIFi FX100

The AMPLIFi FX100 was a guitar floorboard device, incorporating all the tech features of the AMPLIFi amps, sans the power amp & speakers. It offered footswitch access to presets & tap tempo, LED numerical display, on-board expression pedal and stereo 1/4" outputs to feed to an amp or PA.
Sonic Port VX

Sonic Port VX

The portable, bus-powered Sonic Port VX expanded upon the original Sonic Port 24-bit/48kHz iOS audio interface, adding integrated mono & stereo condenser microphones, a mic preamp, Mac® and Windows® support, and a free license for the Line 6 Mobile POD guitar iOS app.
AMPLIFi TT

AMPLIFi TT

AMPLIFi TT offered the models, presets, Bluetooth streaming, remote control & tone-matching features of the AMPLIFi family in a simple, table-top device, to turn any Hi-Fi or powered speaker system into a guitar amp. It offered a direct Amp out, stereo RCA, 1/4" & headphone outs, and USB.
2015
Firehawk FX

Firehawk FX

The Firehawk family expanded on the AMPLIFi's Bluetooth streaming, mobile remote & tone-matching features with greater studio & stage functionality, including 48 HD & 300+ total models, Variax input, FX Loop, and a Looper. The Firehawk FX floorboard included multi-color LED footswitches, expression pedal, and stereo XLR & 1/4" outputs.
Variax Standard

Variax Standard

The Variax Standard Black was the Variax Standard electric guitar in a solid black gloss finish.
Relay G70

Relay G70

The Relay G70 was a tour-grade, 24-bit digital wireless system for guitar & bass. It featured a stompbox style receiver with a 200-foot range, support for multiple instrument transmitters, "scene" preset capability, quad-antenna array/dual receiver topology, XLR and dual 1/4" outputs, and a belt-pack transmitter with locking cable.
Relay G75

Relay G75

The Relay G75 digital wireless system for guitar & bass offered the same specs as the Relay G70 system, but with the receiver within an amp-top, steel enclosed format.
Helix Floor

Helix Floor

Helix has taken over as the flagship multi-effects floorboard system, featuring a new dual-DSP HX modeling engine with 45 amps (4 simultaneously), 30 cabs, 16 mics, and 70 effects, 4 stereo paths, 6.2" multi-color display, expression pedal, 8-in/8-out USB audio interface, and 10 inputs & 12 outputs (including 4 FX loops).
HD Bass Pack

HD Bass Pack

The HD Bass Pack offers a set of two legendary bass amplifier & 2 bass cab models to expand POD HD family devices.
HD Metal Pack

HD Metal Pack

The HD Metal Pack is the HD Model Pack to add a set of 10 of crushing, high-gain amp models to POD HD family devices.
HD Vintage Pack

HD Vintage Pack

The HD Vintage Pack is the HD Model Pack designed to add some of the most priceless, sought-after vintage amps from the Line 6 collection to POD HD family devices.
HD Fully Loaded Bundle

HD Fully Loaded Bundle

Line 6 offers several "HD Model Pack" optional add-ons to expand the model sets offered on POD HD devices. The HD Fully Loaded Bundle includes all 3 HD Model Packs in one specially priced purchase.
Variax Standard White

Variax Standard White

Variax Standard was a new version of the Variax guitar, combining Line 6 tone-modeling with Yamaha craftsmanship for an affordable instrument with classic playability. They featured a solid alder body, bolt-on neck, 3 alnico single-coil pickups, tremolo bridge & Workbench HD editor/librarian software. This White model featured a solid white gloss finish.
Variax Standard Sunburst

Variax Standard Sunburst

The Variax Standard Sunburst was the Variax Standard electric guitar in a vintage sunburst style gloss finish.
2016
Firehawk 1500

Firehawk 1500

The Firehawk 1500 offered all the functionality of the Firehawk FX unit in a powerhouse 1500-watt stereo stage amp. It featured a special "wet/dry/wet" 6-speaker system, stereo FX loop, instrument, Variax and combination XLR - 1/4" monitor inputs, MIDI in/out, FBV 3 controller support, and stereo XLR main outputs.
Helix Rack

Helix Rack

The Helix Rack offers all the features, inputs & outputs of the Helix floor unit in a 4-space rack-mount chassis, sans the integrated footswitches and expression pedal. Helix Rack could be remotely controlled via MIDI, or the optional Helix Control unit.
Helix Control

Helix Control

Helix Control is a dedicated floorboard controller for use with the Helix Rack device. It featured a sturdy metal chassis, touch-sensitive footswitches with multi-color LED rings & custom scribble strip displays, 3 expression pedal inputs, and a single cable data/power connection.
AMPLIFi 30

AMPLIFi 30

AMPLIFi 30 was a "lunchbox" sized combo version of the AMPLIFi modeling amp family, featuring 30-watts and a special stereo 4-speaker system.
Relay G10

Relay G10

The Relay G10 is the ultra-simple & affordable 24-bit digital wireless system for guitar & bass, featuring a 50-foot range, automatic plug-and-play setup, and a G10TII transmitter with built-in Li-ion battery that plugs into the docking receiver for charges that last up to 7-hours of play time.
FBV 3

FBV 3

The FBV 3 is a professional foot controller for the Firehawk 1500 amp and other Line 6 gear, featuring an LCD display, 5 FX footswitches with multi-color LEDs, 8 bank/channel footswitches, on-board expression pedal with toe switch, additional expression pedal input, a single-cable data/power connection and USB.
Variax Limited Edition Emerald

Variax Limited Edition Emerald

The Variax Limited Edition Emerald was the Variax Standard electric guitar with a custom emerald green finish. Each guitar included a “Limited Edition” insignia and custom serialized number plate.
Spider V 30

Spider V 30

The Spider V 30 was the 30-watt combo version of the Spider V Series amplifier family. Featuring a bi-amped full-range speaker system with an 8” loudspeaker + tweeter, it offered over 200 amps, effects and cabs, built-in drum loops and metronome, a USB output and free Cubase LE recording software.
Spider V 60

Spider V 60

The Spider V 60 offered all features of Spider V 30, in a 60-watt combo amp with a bi-amped full-range speaker system with 10” loudspeaker + tweeter. Spider V 60 was wireless-ready for Line 6 Relay transmitters and features a built-in looper.
Spider V 120

Spider V 120

The Spider V 120 offered all features of Spider V 60, in a 120-watt combo amp with a bi-amped full-range speaker system with 12” loudspeaker + tweeter. Spider V 120 featured XLR direct outputs for live use.
Spider V 240

Spider V 240

The Spider V 240 offered all features of Spider V 120, in a 240-watt combo amp with a bi-amped full-range speaker system with 2 x 12” loudspeakers + 2 tweeters.
Spider Classic 15

Spider Classic 15

The Spider Classic 15 was a 15-watt combo amplifier with a 1 x 8" speaker. It offered 4 amp models with fully adjustable parameters, 6 classic effects, and Spider Edit software for easy tone editing and management.
2017
Spider V 240 HC

Spider V 240 HC

The Spider V 240HC head was the world’s first guitar amp head with an integrated full-range stereo speaker system for practicing and tone creation. When paired with a Spider 412 cabinet, the built-in speakers provided stereo high frequency precision in a massive full-range stage rig.
Echo Farm

Echo Farm

The Echo Farm 3.0 plug-in offered a legendary collection of echo effects based on vintage hardware units and Line 6 originals in an updated 64-bit AAX format for Pro Tools 11 and higher.
Shuriken Variax SR270

Shuriken Variax SR270

The Shuriken Variax SR270 guitar was the result of collaboration between Shuriken Guitars, Line 6, and Yamaha Guitar Development. Shuriken Variax SR270 featured a 27" scale length, an assertive body shape, and Variax HD technology.
Helix LT

Helix LT

The Helix LT guitar processor features the same advanced HX Modeling technology found in Helix Floor and Helix Rack. With a streamlined I/O compliment and hardware configuration, Helix LT delivers the highest levels of performance, flexibility and control in its class.
Helix Native

Helix Native

The Helix guitar/effects processor plug-in accurately recreates the dynamic sound and feel of vintage tube amps, cabs, mics and effects. It offers the same precision HX amp and effects modeling as the Helix and the Helix Rack guitar processors.
Variax Limited Edition Amethyst

Variax Limited Edition Amethyst

The Variax Limited Edition Amethyst was a Variax Standard electric guitar with a custom a translucent-purple finish over a flamed-maple veneer top. The color was selected through a vote by more than 2,000 guitarists in the Color Sweepstakes contest. Each guitar included a Limited Edition insignia and custom serialized number plate.
2018
Variax Limited Edition Onyx

Variax Limited Edition Onyx

The Variax Limited Edition Onyx guitar was a Variax Standard electric guitar with a custom translucent-black finish over a flamed-maple veneer top. Each guitar included a “Limited Edition” insignia and custom serialized number plate.
HX Effects

HX Effects

HX Effects is a compact and pedalboard-friendly multi-effects unit that offers 100+ effects drawn from award-winning Helix hardware and software processors, plus dozens of legacy sounds from the acclaimed Line 6 M-Series and Stompbox Modeler pedals.
Powercab 112

Powercab 112

The Powercab 112 active guitar speaker system introduces Speaker Modeling—this is the first time individual speaker drivers have been modeled in a product. Powercabs also feature custom hybrid coaxial loudspeakers that deliver the wide range of a P.A. speaker with the snappy response of a guitar speaker.
Powercab 112 Plus

Powercab 112 Plus

The Powercab 112 Plus active guitar speaker system offers all of the features of the Powercab 112, plus powerful advanced features such as a 2-inch LCD, 128 user preset locations, MIDI In/Out, AES/EBU and L6 LINKTM digital I/O, a multipurpose second input, a USB audio interface, and loading of up to 128 third-party speaker cabinet impulse responses (IRs).
Shuriken Variax SR250

Shuriken Variax SR250

The Shuriken Variax SR250 guitar was the result of collaboration between Shuriken Guitars, Line 6, and Yamaha Guitar Development. Shuriken Variax SR250 featured a 25.5" scale length, a unique contoured body shape, and Variax HD technology.
Spider V 20

Spider V 20

Spider V 20 was a 20-watt combo amp with an 8” loudspeaker featuring 16 presets and three simultaneous effects. The Spider V 20 amp offered an independent reverb control, a built-in tuner, tap tempo for delays and other time-based effects, and a micro USB output for recording and editing.
HX Stomp

HX Stomp

The HX Stomp guitar processor delivers more than 300 Helix amps, cabs, and effects in an ultra-compact pedal—up to six simultaneously. HX Stomp is at once a “super stompbox,” a backup or travel rig, an add-on tone expander, and a multi-channel audio interface.
Spider V 20 Red Edition

Spider V 20 Red Edition

The Spider V 20 Red Edition amp offered guitarists a colorful alternative to the original Spider V 20—was available in limited numbers from select dealers.
2019
Relay G10S

Relay G10S

Relay G10S is an easy-to-use 24-bit lossless digital wireless system for guitar & bass, designed especially for use on pedalboards. It features a 130' (40m) line-of-sight range, a rugged metal housing, an XLR output for professional applications, and includes a G10T/II transmitter and a 9V power supply.
Powercab 212 Plus

Powercab 212 Plus

The Powercab 212 Plus active stereo guitar speaker system was specifically designed for use with professional modelers and offers both Flat (FRFR) and proprietary Speaker Modeling modes.
Spider V MkII 30

Spider V MkII 30

The Spider V 30 MkII is more than just a great practice amp loaded with lots of inspiring sounds—it also provides the flexibility to make crafting your own tones fun and easy.
Spider V MkII 60

Spider V MkII 60

The Spider V 60 MkII gives you all the sounds you need, along with practice tools and built-in wireless connectivity with the optional Line 6 Relay G10T transmitter.
Spider V MkII 120

Spider V MkII 120

The Spider V 120 MkII features 120 watts of power, built-in wireless connectivity, and Line 6 FBV 3 Foot Controller compatibility.
Spider V MkII 240

Spider V MkII 240

The Spider V 240 MkII features full-spectrum stereo tone, 240 watts of power, dual 12" speakers, wireless connectivity, and Line 6 FBV 3 Foot Controller compatibility.
Spider V MkII 240HC

Spider V MkII 240HC

The Spider V 240HC MkII is the ultimate amp for gigging, recording, and rehearsing. Plug the amp head into a Line 6 412 or other speaker cabinet for powerful tone onstage, or use the dedicated 50-watt amp and built-in 4" speakers for practicing and rehearsals, or connect directly to a DAW via USB or XLR stereo outputs.
Spider V 412 MkII

Spider V 412 MkII

The Spider V 412 MkII speaker cabinet is the perfect mate for the Spider V 240HC MkII amp head. A closed-back design produces midrange chunk and low-end thrust, while four custom 12" Celestion® speakers deliver excellent sound dispersion and authentic tone and feel.
AMP FARM 4.0

AMP FARM 4.0

The Amp Farm 4.0 plug-in brings a legendary collection of amp, speaker, and mic models into the present with support for 64-bit AU, VST, and AAX formats, making it compatible with virtually any DAW.
Spider V 20 MkII

Spider V 20 MkII

Spider V 20 MkII is a 20-watt combo amp with an 8” loudspeaker. It updates the original Spider V 20 amplifier with 16 all-new presets, the implementation of Classic Speaker mode, and several cosmetic enhancements.
2020
POD Go

POD Go

The POD Go multi-effects processor features an intuitive plug-and-play interface, lightweight and ultra-portable design, rugged multi-function expression pedal, and pro-level amp, cab, and effect models drawn from the acclaimed HX family of guitar and effects processors.
2021
HX Stomp XL

HX Stomp XL

The HX Stomp XL amp and effects processor delivers HX modeling in a performance-ready pedal. This expanded version of the HX Stomp pedal features eight capacitive-touch footswitches.
POD Go Wireless

POD Go Wireless

The POD Go Wireless amp and effects processor features an intuitive plug-and-play interface, lightweight and ultra-portable design, rugged multi-function expression pedal, and pro-level amp, cab, and effect models drawn from the HX family of processors—plus an onboard Relay wireless receiver and Relay G10TII transmitter.
Relay G10TII

Relay G10TII

The plug-and-play Relay G10TII wireless instrument transmitter comes bundled with Relay G10 and G10S instrument wireless systems and POD Go Wireless, and is also sold separately for use with products such as Relay ready Line 6 and Yamaha amplifiers. It updated the Relay G10T by accommodating nearly all active pickup systems that previously required an adapter.
2022
Catalyst 200

Catalyst 200

The Catalyst 200 2x12 combo amplifier operated like a traditional guitar amp, while providing the increased versatility of a modern amp, and featured six Original Amp Designs crafted using our renowned HX sound design techniques.
Catalyst 100

Catalyst 100

The Catalyst 100 1x12 combo amplifier operated like a traditional guitar amp, while providing the increased versatility of a modern amp, and featured six Original Amp Designs crafted using our renowned HX sound design techniques.
Catalyst 60

Catalyst 60

The Catalyst 60 1x12 combo amplifier performed like a traditional guitar amp, while providing the increased versatility of a modern amp, and featured six Original Amp Designs crafted using our renowned HX sound design techniques.
Metallurgy Collection

Metallurgy Collection

The Metallurgy Collection of amp and effects plugins was created for guitarists wishing to quickly access contemporary versions of classic and modern metal tones. It bundles the Modern, Thrash, and Doom plugins (also sold individually).
DL4 MKII

DL4 MKII

The compact DL4 MkII includes all the sounds and functionality of the original DL4, plus 15 new MkII delays, two loopers, a microphone input, MIDI capabilities, and microSD memory expansion.
POD Go | Limited Edition Red

POD Go | Limited Edition Red

Think of it as a nod to the original bright-red POD that sparked the amp and effect modeling revolution nearly 25 years ago. It's the POD Go you know—but it's red!
2023
HX One

HX One

HX® One is a powerful stereo effect pedal featuring intuitive controls, 250+ effects taken from HX family processors, a unique Flux Controller, and adjustable input impedance.
Helix Floor | Limited Edition Platinum

Helix Floor | Limited Edition Platinum

The Helix Floor | Limited Edition Platinum amp and effects processor is identical to the standard black Helix Floor in every way—except that it's platinum colored!
2024
POD Express

POD Express

The POD Express is an ultra-portable guitar amp and effects processor featuring simple controls and 31 models derived from HX family processors.
POD Express | Bass

POD Express | Bass

The POD Express | Bass is an ultra-portable bass amp and effects processor featuring simple controls and 31 models derived from HX family processors.
Catalyst CX 200

Catalyst CX 200

Catalyst CX 200 is a 200-watt dual-channel 2x12 combo amplifier featuring 12 Amp Voicings derived from Helix. It performs like a traditional guitar amp—while providing the increased versatility of a modern amp.
Catalyst CX 100

Catalyst CX 100

Catalyst CX 100 is a 100-watt dual-channel 1x12 combo amplifier featuring 12 Amp Voicings derived from Helix. It performs like a traditional guitar amp—while providing the increased versatility of a modern amp.
Catalyst CX 60

Catalyst CX 60

Catalyst CX 60 is a 60-watt dual-channel 1x12 combo amplifier featuring 12 Amp Voicings derived from Helix. It performs like a traditional guitar amp—while providing the increased versatility of a modern amp.
HX Stomp XL | Limited Edition White

HX Stomp XL | Limited Edition White

The HX Stomp XL | Limited Edition White amp and effects processor is identical in every way to the standard black HX Stomp XL—but it's white!
DL4 MkII 25th Anniversary Edition

DL4 MkII 25th Anniversary Edition

The 25th Anniversary DL4 MkII modeler delivers a set of new delays and features in addition the same renown effects as it did 25 years ago. Included are a hand-numbered label, a keychain, and a DL4 MkII product sticker.
POD Express | Black

POD Express | Black

The POD Express | Black is an ultra-portable guitar amp and effects processor featuring simple controls and classic and modern high gain tones derived from HX family processors.